Axxess AXDSPX-GL1 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXDSPX-GL1 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 4 Bewertungen. Hast du eine Frage zu Axxess AXDSPX-GL1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXDSPX-GL1

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 2/26/25 INSTAXDSPX-GL1

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Installation & Installation Options ........................2

Connections ........................................................3-4

Mobile App .........................................................5-6

Specifications .........................................................7

DSP Interface With Pre-Wired Harness

Fits GM2007-2017

• Designed for both amplified and non-amplified models

• Includes a DSP (Digital Signal Processor)

• 31 Band graphic EQ

• 10 individually assignable outputs

• Independent equalization on each of the 10 outputs

• Independent high pass, low pass, and bandpass filters

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Retains factory parking sensor chimes

(Features continued on next page)

• AXDSPX-GL1 interface

• AXDSPX-GL1 interface harness

• AXDSPX-GL1 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

www.MetraOnline.com

For Dash Disassembly Instructions, refer to

metraonline.com.Enter the year, make, and

model of the vehicle in the Vehicle Fit Guide

for Radio Install kits.

Google Play StoreApple App Store

iOS 12.1 or higherAndroid 9 or higher

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Produktspezifikationen