Axxess AXLOCM-150 Bedienungsanleitung

Lies die bedienungsanleitung für Axxess AXLOCM-150 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 5 Bewertungen. Hast du eine Frage zu Axxess AXLOCM-150 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

AXLOCM-150AXLOCM-150

INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONS

AXLOCM-150AXLOCM-150

INSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS

REV. 12/13/19REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

REV. 12/13/19REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output

wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

YellowBattery +12v input

BlackGround input

BlueRemote +12v output the above power wires can be connected directly

to the amplifier being added

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front (+) input

Gray/Black Right front (-) input

Black/WhiteReference ground (-) (reference ground optional if noise is present)

Note: Be sure that all audio input connections are polarized or in phase with each other. That is, the

positive output wires from the audio source need to be connected to the corresponding positive

input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in

poor bass response and low quality audio.

Continued on other side

The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output

wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

YellowBattery +12v input

BlackGround input

BlueRemote +12v output the above power wires can be connected directly

to the amplifier being added

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front (+) input

Gray/Black Right front (-) input

Black/WhiteReference ground (-) (reference ground optional if noise is present)

Note:Be sure that all audio input connections are polarized or in phase with each other. That is, the

positive output wires from the audio source need to be connected to the corresponding positive

input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in

poor bass response and low quality audio.

Continued on other side

The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output

wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

YellowBattery +12v input

BlackGround input

BlueRemote +12v output the above power wires can be connected directly

to the amplifier being added

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front (+) input

Gray/Black Right front (-) input

Black/WhiteReference ground (-) (reference ground optional if noise is present)

Note:Be sure that all audio input connections are polarized or in phase with each other. That is, the

positive output wires from the audio source need to be connected to the corresponding positive

input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in

poor bass response and low quality audio.

Continued on other side

The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output

wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

YellowBattery +12v input

BlackGround input

BlueRemote +12v output the above power wires can be connected directly

to the amplifier being added

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front (+) input

Gray/Black Right front (-) input

Black/WhiteReference ground (-) (reference ground optional if noise is present)

Note:Be sure that all audio input connections are polarized or in phase with each other. That is, the

positive output wires from the audio source need to be connected to the corresponding positive

input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in

poor bass response and low quality audio.

Continued on other side

2 Channel Line Output Converter (LOC) with Amp Turn-On

2 Channel Line Output Converter (LOC) with Amp Turn-On

2 Channel Line Output Converter (LOC) with Amp Turn-On

2 Channel Line Output Converter (LOC) with Amp Turn-On

Produktspezifikationen