Barco Coronis 3MP LED Bedienungsanleitung
Lies die bedienungsanleitung für Barco Coronis 3MP LED (54 Seiten) kostenlos online; sie gehört zur Kategorie Monitor. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 18 Bewertungen. Hast du eine Frage zu Barco Coronis 3MP LED oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/54

Coronis 3MP LED Display
User
User
User
UserUser Guide
Guide
Guide
GuideGuide
MDCG-3221
K5902060/03
12/01/2015

Barco
Barco
Barco
BarcoBarco nv
nv
nv
nvnv
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: +32 56.23.32.11
Fax: +32 56.26.22.62
Support: www.barco.com/esupport
Visit us at the web: www.barco.com
Printed in Belgium

Table of contents
TABLE OF CON TENTS
1. Welcome! .......................................................................................... 3
1.1 About the product ... . .... . ..... . ....... .... . ....... . ..... .... . ....... . ....... .... . ..... . ....... .... . ... .... . .. 3
1.2 Symbols ..... .. .. .. . ....... ....... .... . .. .... .. .. . ....... . ..... .. .. . .... . .. .. .. .. .. . .. . .. .. .. .. .. . .... .... . .. .. . 3
1.3 What’s in the box. . . .. .. .. . .... . .. .. .. . ... . . . .... . .. .. .. . .... . .. . .... . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . ... . . . 4
2. Parts, controls and connectors .................................. ............................. 5
2.1 Display front view .. ...... ... . ...... ...... .. .. ...... ..... .. ... ...... .... .. .... ...... ... ... .... ...... .. .... .... . 5
2.2 Display rear view . ..... ... .. .. .. .. .. ..... ... .. ... ... .. .. ... ... .. .. .. .. .. .. ..... ... ..... ... .. .... . ... ..... ... .. . 6
3. Display installation ........................................................................ ...... 9
3.1 Unlocking the height mechanism . .. .. . .... . .. .. .. . .. . .. . .... . .. .. .. . .... . .. . . ... . .. .. . .... . .. .. .. . . .. .. .. . .. 9
3.2 Adjusting the display position . .. .... ...... ... . ...... ...... . ... ...... .... .. .... ...... .. .... .... ...... . ..... ... 9
3.3 Removing the connector compartment cover .. . .. .. . .... . .. .. .. . . .. .. .. . .. . .. .. .. . .... . .. . .... . .. .. .. . .. . .10
3.4 Connecting the signal cables .. . .. .. . .... . .. . . .. . . .. .. .. . .. . .. .. .. . . .. .. .. . .... . .. .. .. . .. . .. . .... . .. .. .. . .... 11
3.5 Routing the cables & Reattach the connector compartment cover .. ..... ...... ... . ...... ...... . ... ..... 12
3.6 VESA-mount installation .. . .... . .. .. .. . ... . . .. . .... . .. .. . .... . .. . . ... . .. .. .. . .... . .. .. . . .. .. .. . .... . .. .. .. . .. 13
3.7 First time starting up . .. . .... . .. .. . .... . .. . .... . .. .. .. . .... . . . .. . . .. .. .. . .... . .. .. .. . . . . .. . .... . .. .. .. . .... . .. . 14
4. Daily operation ................................................................................... 15
4.1 Recommendations for daily operation . .. .... ...... .... . ..... ...... .. .. ...... ..... . .... ...... ... ... .... ..... 15
4.2 Key indicator lights . ...... .... .. .... ...... ... . ...... ...... . ... ...... ..... . .... ...... ... ... .... ...... . ..... .... .16
4.3 Standby switching. . .. . ... .. .. . .... . .. .. .. . .... . .. . .. . .. .. .. . .... . .. . . .. . . .. .. .. . .. . .. .. .. . ... . . .. . .... . .. .. . .. 16
4.4 Bringing up the OSD menus . . .... .. ... . .. ... . ...... ...... .... .. .... .. .... . . .. ... ... .. . ... .. . . .... .. ... . .. ... 17
4.5 Navigating through the OSD menus . .... .... ... ... ...... .... . ..... ...... ... . ...... ...... . ... ...... .... .. ... 17
5. Advanced operation ............................................................................. 19
5.1 OSD menu language . . ...... ...... . ... ...... .... .. .... ...... .. .... .... ...... . ..... .... .... .. ...... .... .. .... .19
5.2 OSD menu automatic close function. .... .... .. ...... .... .. .... ...... .... . ..... ...... .. .. ...... ..... . .... ...19
5.3 Power status indicator light . . . . . .. .. .. . .... . .. .. . . .. .. .. . .... . .. .. .. . ... . . .. . .. . .. .. .. . .... . .. . . ... . .. .. . .... 19
5.4 Key indicator lights . ...... .... .. .... ...... ... . ...... ...... . ... ...... ..... . .... ...... ... ... .... ...... . ..... .... .20
5.5 Power lock function .. ...... . ... .. .... . . .... . . .. ... ... .. . ... .. . . .... .. ... . .. ... . .... . . .... . . .... ...... ...... .. . 20
5.6 Ethernet over USB .. ... . . .. . .... . .. .. .. . .. . .. . . ... . .. .. .. . .... . .. .. . . .. .. .. . .... . .. .. .. . ... .. .. . .. . .. .. .. . .... 20
5.7 USB.............................................................................................................21
5.8 DPMS mode ...... ...... ...... .. .. ... . .. ... ... .. . . .... . . .... .. ... . ...... ...... .... .. . ... .. .... . . .. ... ... ... ... .21
5.9 Hibernate.......................................................................................................22
5.10 Luminance target..... ... . ...... .... .... .. ...... .... ... ... ...... .... . ..... ...... ... . ...... ...... .. .. ...... ..... 22
5.11 Viewing modes .. . .. .. . .... . .. . . ... . .. .. .. . .... . .. .. . . .. .. .. . .... . .. .. .. . .. . .. . .... . .. .. .. . .... . .. . . ... . .. .. . .. 22
5.12 Display functions .. . . . . . .. .. .. . .... . .. .. .. . . .. .. .. . .. . .. .. .. . .... . .. . .... . .. .. .. . .. . .. .. .. . . .. .. .. . .... . .. .. . .. 23
5.13 Ambient Light Compensation (ALC) ... .... ...... ... ... .... ...... .. .... .... ..... . ...... .... ... ... ...... .... . 24
5.14 Reading rooms ....... ... . ...... ...... . ... ...... ..... . .... ...... ... ... .... ...... .. .... .... ...... . ..... .... .... .24
5.15 Continuous ALC .. . . .. .. .. . .... . .. .. .. . ... . . . .... . .. .. .. . .... . .. . . ... . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . ... . . . 25
5.16 Embedded QA.. ...... .... ... ... ...... .... .. .... ...... ... . ...... ...... .. .. ...... ...... . ... ...... .... .. .... ..... 25
5.16.1 About Embedded QA . . .. . .... . .. . .... . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . ... .. .. . .... . .. .. .. . ... . . . .... 26
5.16.2 DICOM status report . .. ...... .... .. .... ...... ... ... .... ...... . ..... .... .... .. ...... .... .. .... ...... .... . 26
5.16.3 DICOM compliance check.. ... .... ...... . ..... .... .... .. ...... .... ... ... ...... .... . ..... ...... .. .. ..... 27
5.16.4 DICOM calibration. .... . . .... . .. .. .. . .... . .. . . ... . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . ... . . .. . .... . .. .. .. . 27
5.16.5 Reset DICOM calibration ...... .. .... ...... ... . ...... ...... .. .. ...... ..... . .... ...... ... ... .... ...... .. .27
5.16.6 DICOM error threshold. .. . .... . .. .. .. . ... . . . .... . .. .. .. . .... . .. . .... . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . 28
5.17 Image scaling. .. . .. . .. . . .. . . .. .. .. . .. . .. .. .. . ... . . .. . .... . .. .. .. . .. . .. . .... . .. .. .. . .... . .. .. . . .. .. .. . .... . .. .. . 28
5.18 Display orientation . . . .. . .... . .. .. .. . .... . .. . .. . .. .. .. . .... . .. .. .. . . .. .. . .... . .. .. .. . . .. .. .. . .... . .. .. . .... . .. . 28
5.19 Video input signals .. . .. .. .. . .... .... . .. .. . .... .... . .. .. .. .. .. . .. . .. .. .. .. .. . .... .... . .. .. .. . .. .... . .. .. .. .. .. . 29
5.20 Video encoding modes . ..... ...... ... ... .... ...... . ... ...... .... .. .... ...... ... ... .... ...... . ..... .... .... .. .29
5.21 Grayscale conversion modes .. . .. .. . .... . .. .. .. . ... . . .. . .... . .. .. . .... . .. . .... . .. .. .. . .... . .. .. . . .. .. .. . .... 30
5.22 EDID timings. . .. . .... . .. .. . ... . . .. . .... . .. .. .. . .... . . .... . .. .. .. . .... . .. . . .. . . .. .. . .... . .. .. .. . . .. .. .. . .... . .. . 30
5.23 Display info . .. .... ...... . ... ...... ..... . .... ...... ... ... .... ...... .. .... .... ...... . ..... .... .... .. ...... .... ... 31
5.24 Display status... .... .... .. ...... .... ... ... ...... .... .. .... ...... ... . ...... ...... .. .. ...... ...... . ... ...... .... .31
K5902060 CORONIS 3MP LED DISPLAY 12/01/2015 1
Produktspezifikationen
Marke: | Barco |
Kategorie: | Monitor |
Modell: | Coronis 3MP LED |
Touchscreen: | Nein |
Bildschirmdiagonale: | 21.3 " |
Marktpositionierung: | Medizinisch |
Eingebaute Lautsprecher: | Nein |
Integrierte Kamera: | Nein |
Bluetooth: | Nein |
AC-Netzadapter: | Ja |
Mitgelieferte Kabel: | DisplayPort, DVI, USB |
Produktfarbe: | Black, White |
Höhenverstellung: | Ja |
Neigungsverstellung: | Ja |
AC Eingangsspannung: | 100 - 240 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
On-Screen-Display (OSD): | Ja |
Betriebstemperatur: | 0 - 40 °C |
Relative Luftfeuchtigkeit in Betrieb: | 8 - 80 % |
Schnellstartübersicht: | Ja |
Display: | LED |
Stromverbrauch (Standardbetrieb): | 40 W |
HD-Typ: | Full HD |
Natives Seitenverhältnis: | 4:3 |
Reaktionszeit: | 40 ms |
Kontrastverhältnis: | 1400:1 |
Bildwinkel, horizontal: | 178 ° |
Bildwinkel, vertikal: | 178 ° |
Stromverbrauch (Standby): | - W |
LED-Anzeigen: | Ja |
Temperaturbereich bei Lagerung: | -20 - 60 °C |
Luftfeuchtigkeit bei Lagerung: | 5 - 95 % |
Sichtbare Größe (diagonal): | 540 mm |
Gewicht (ohne Ständer): | 8000 g |
Breite (ohne Standfuß): | 378 mm |
Tiefe (ohne Standfuß): | 84 mm |
Höhe (ohne Standfuß): | 491 mm |
VESA-Halterung: | Ja |
DVI Anschluss: | Ja |
Panel-Montage-Schnittstelle: | 100 x 100 mm |
Gerätebreite (inkl. Fuß): | 378 mm |
Gerätetiefe (inkl. Fuß): | 235 mm |
Gerätehöhe (inkl. Fuß): | 628 mm |
Gewicht (mit Ständer): | 12800 g |
Neigungswinkelbereich: | -5 - 25 ° |
Kabelsperre-Slot: | Nein |
Integrierter Kartenleser: | Nein |
Anzahl DVI-D-Anschlüsse: | 1 |
Seitenverhältnis: | 4:3 |
Mitgelieferte Software: | MediCal QAWeb |
Höheneinstellung: | 100 mm |
Anzahl OSD-Sprachen: | 14 |
Höhe bei Betrieb: | 0 - 2000 m |
Anzahl DisplayPort Anschlüsse: | 1 |
Helligkeit (typisch): | 1700 cd/m² |
Sichtbare Größe (horizontal): | 433 mm |
Sichtbare Größe (vertikal): | 325 mm |
Pixel Abstand: | 0.2115 x 0.2115 mm |
Vertikaler Scanbereich: | 24 - 100 Hz |
Horizontaler Scanbereich: | 15 - 129 kHz |
TV Tuner integriert: | Nein |
Konformität mit Industriestandards: | RoHS |
USB-Hub-Version: | 2.0 |
Anzahl der nachgeschalteten Steckplätze vom Typ USB-A: | 3 |
Pivot: | Nein |
Schwenkbar: | Ja |
Schwenkwinkelbereich: | -30 - 30 ° |
Höhe bei Lagerung: | 0 - 7500 m |
Stromversorgungsfunktionen - Beschreibung: | Ja |
Video-Pixelrate: | 280 MHz |
Display-Auflösung: | 2048 x 1536 Pixel |
Ethernet/LAN: | Nein |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Barco Coronis 3MP LED benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Monitor Barco
23 Juli 2025
23 Juli 2025
9 Juli 2025
5 September 2024
3 September 2024
22 August 2024
21 August 2024
16 August 2024
15 August 2024
15 August 2024
Bedienungsanleitung Monitor
- Pioneer
- Satco
- CTL
- QSC
- Alesis
- V7
- Dahua Technology
- Drawmer
- Posiflex
- Yamaha
- CoolerMaster
- Ring
- Yiynova
- Schneider
- Raysgem
Neueste Bedienungsanleitung für -Kategorien-
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025
1 August 2025