Barco R9832767 Bedienungsanleitung

Lies die bedienungsanleitung für Barco R9832767 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beamerzubehör. Dieses Handbuch wurde von 61 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 31 Bewertungen. Hast du eine Frage zu Barco R9832767 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Specifications

F No.F2.0-2.4

Focal distancef = 19.6-26.5 mm

Zoom/focusElectrical drive

OPTION LENS

H LENS 1.3-1.8

Lens Mounting Manual

ENGLISH

Scr reen size and pojection distance

XGA model

Screen size (4:3)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

4010232 81 24 61 411.0571.512 302638

60 152 48 122 3691631.6882.2184639512

80 203 64 163 48 122 862.21183.02461411616

100254 80 203 60 1521082.71483.83076614820

150 381 120 30590229 1644.22245.7451148211230

200 508 160 406 120 305 2195.63007.66015211281641

250 635 200 508 150 381 2757.0--7519114362051

300 762 240 610 180 457 3318.4--9022917432461

WXGA model

Screen size (16:10)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

4010234 86 21 54 441.1621.610 2551239

60 152 51 129 3281681.7942.4 15 37717513

80 203 68 172 42 108 922.31273.2 19 49923717

100254 85 215 53 1351163.01604.124 62 11 29922

150 381 127 32379202 1764.52416.136 92 17 431333

200 508 170 431 106 269 2366.03238.249 123 23581744

250 635 212 538 132 337 2967.5--61 154 28722155

300 762 254 646 159 404 3569.0--7318534862665

WUXGA model

Screen size (16:10)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

4010234 86 21 54 421.1591.510 2641038

60 152 51 129 3281651.6902.31539615512

80 203 68 172 42 108 872.21213.12152820717

100254 85 215 53 1351102.81523.926661025821

150 381 127 32379202 1674.22295.8399815371231

200 508 170 431 106 269 2245.73077.85213120501642

250 635 212 538 132 337 2817.1--6516424622052

300 762 254 646 159 404 3388.6--7719729752562

The above numbers are approximate and may be slightly different from the actual measurements.

The lens shift height and width show distances from the factory default position.

Cautions after mounting

•Do not transport the projector with the option lens mounted. The projector may be damaged.

•

With the option lens mounted, the brightness, resolution, and color uniformity in the projected image may differ from those with

the standard lens.

•With the option lens mounted, the adjustable angle in the keystone adjustment differs from that with the standard lens.

•In the keystone adjustment with the option lens mounted, the proper aspect ratio may not be obtained.

••

•

Projected images may become distorted, have decreased resolution, or have shadows at their corners if they are positioned close

to the top (or bottom in the case of a ceiling-mount projector) or right or left edge of the effective projection area shown on the right.

•For details about ZOOM/FOCUS adjustment and LENS SHIFT LOCK, see User Manual of the projector.

Be caeful not to caught in the opening in the lens while thelens is moving.r

•Lens mounting must be performed by service personnel.

•

Be sure to turn off the projector and unplug the power cord from the wall outlet before mounting the option lens.

Lens mounting procedure

Mount the option lens using the following procedure.

1.Remove the lens cover.

•

2.

Mount the option lens to the standard lens turning it clockwise. 3.

Fit the wire and eyelet of the option lens to the projector using the attached screw.

(This prevents the option lens from dropping.)

Protect your eyes and face from the swinging wire when mounting the option lens.

(Remove the lens caps before attaching the option lens.)

L

L

W1W1

H1 H2H

W

Maximum projection area

Center of the lens

Screw M3 x 8

Wire and eyelet

Option lens

Option lens

Lens cover

Lens cap

13/12/2013 Printed in Hyogo Japan

Produktspezifikationen