Barska AE10822 Bedienungsanleitung

Lies die bedienungsanleitung für Barska AE10822 (1 Seiten) kostenlos online; sie gehört zur Kategorie Teleskop. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu Barska AE10822 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

ANCHOR MASTER

28 Power, 70060

Telescope

HOWTO ASSEMBLE YOURSCOPE:

Before, you begin to assemble your scope, you will

need

to have a Phillips-head screwdriver and a

Crescent wrench. *NOTE* Please be careful not to

scratch your scope.

1. Place the optical tube and arc mount on its side.

2. Attach the legs of the tripod at the base of the mount.

3. Carefully slide one of the leg attachments shaft through

the top of the attached leg through the holes of the

mount. Make sure that the support tray brackets

are facing up.

4. Gently stand the scope and tripod, slowly spread the

legs of the tripod.

Make sure to tighten all screws and nuts. Your scope is

now assembled and ready to be used.

H

OW TO MOUNT THE FINDER SCOPE

1.

A

ttach

the 2 mounting rings to the optical tube with 4

mounting screws.

2. Center the finder scope within the mounting rings

using 6 mounting screws

HOWTOUSE YOUSCOPE:

Start by loosening the lock and levers and gently guide

the

scope to your desired position.

1. Once it’s at the position that you want, tighten the locks

and levers.

2. Point the objective lens to an object and look through

the eyepiece.

3. With slow and tiny motions, rotate the focus knob

slowly, until your view of the object is sharp and

in focus.

HOWTO TAKE CARE OF YOUR SCOPE:

1. When wiping the lenses, use a soft lens cloth.

2. To remove any remaining dirt or smudges, add

one or two drops of isopropyl alcohol to the cloth,

then wipe gently.

3. Store your scope in a moisture-free area.

Parts included in package:

p g

Optical tube with mount attached 1 unit

Mahogany wood tripod legs 3 units

Washers and bolts 3 sets

Mounting Screws

10 pcs

Mounting Rings

2 pcs

PARTS

1. Optical tube with arc mount attached

**IMPORTANT**

NEVER ATTEMPT TO CLEAN YOUR SCOPE INTERNALLY OR

TRY TO TAKE IT APART. DO NOT LOOK DIRECTLY AT THE

SUN WITH THE SCOPE AS IT WILL CAUSE DAMAGE TO

YOUR EYE.

Safety Chain 1 unit

Acorn nuts 3 pcs

2. Mahogany wood tripod with safety chain

6.

3. Objective Lens

4. Eyepiece

5. Focus Knob

Finder Scope

7. Image diagonal

1

2

3

4

5

7

6

Produktspezifikationen