Barumi EF-BM-6000 Bedienungsanleitung
Lies die bedienungsanleitung für Barumi EF-BM-6000 (8 Seiten) kostenlos online; sie gehört zur Kategorie Toilette. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Barumi EF-BM-6000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
3 STEP INSTALLATION
WHAT TO EXPECT DURING INSTALLATION
THE 3 MAIN STEPS.
REMOVE THE CURRENT TOILET SEAT
Find the bolt caps at the back of the
seat and open them if they’re closed.
Next, firmly grip the nut that is
fastened to the end of the bolt
and begin turning the bolt
counterclockwise to unfasten the
seat. In some cases, if the nut has
wings, you can turn the nut while
holding down the bolt.
Depending on your toilet seat,
you may need to use a phillips
screwdriver and a wrench.
CHECK FOR MISSING PARTS
To ensure your installation is worry-free, please make sure you have all the
necessary parts from the factory by referencing the parts list. Set each part
aside so you can easily access them during installation.
STEP 1 PREPARE!
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
CONNECT TO YOUR BATHROOM
OUTLET (BEST OPTION)
If your bathroom is equipped with a
grounded electrical outlet (GFCI), plug your
power cord into it to turn the bidet on.
OUTLET NOT AVAILABLE
If your bathroom is not equipped with a
grounded electrical outlet, an extension cord
may be used to connect the power cord to a
GFCI outlet. Please use a grounded
extension cord.
POSITIONING BRACKET
PLEASE NOTE: Your positioning bracket setup may look different from the image above.
Please make sure each screw is spaced inside the frame identically to each other.
THE POSITIONING BRACKET MUST BE INSTALLED PROPERLY
Before installing the bidet seat, it is imperative the
positioning bracket is installed first AND properly.
If this bracket is not positioned and installed
properly, your bidet seat will not be aligned with
your toilet.
STEP 2 INSTALL!
STEP 3 CONNECT!
Screw M/S
Washer
Bolt bracket
Base bracket
Rubber nut insert
Installation hole
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
INSTALLATION PROCEDURE
01
Positioning bracket
Flexible hose
T-valve
Secure bracket (2pcs) Screw M/S (2pcs)
Washer (2pcs)
Rubber insert (2pcs)
Separate water supply hose
Shut off the water valve.
Drain the toilet tank.
Disconnect the hose.
BEFORE INSTALLATION
For optimal performance, please install the product after reading the
installation manual thoroughly.
Plug in the water supply only after installation is complete.
Toilet hose
Water supply valve
1
2
3
barumiusa.com • info@barumiusa.com
TM
INSTALLATION GUIDE
Produktspezifikationen
| Marke: | Barumi |
| Kategorie: | Toilette |
| Modell: | EF-BM-6000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Barumi EF-BM-6000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Toilette Barumi
22 August 2024
22 August 2024
7 Mai 2024
18 Februar 2024
Bedienungsanleitung Toilette
- Coleman
- Kogan
- Duravit
- Philips
- Bemis
- Geberit
- MCombo
- Dometic
- Gerber
- Miomare
- Sloan
- Sunwind
- Campingaz
- Easy Home
- Haier
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
20 Juni 2025
20 Juni 2025
12 Juni 2025
7 Juni 2025
4 Juni 2025
30 Mai 2025
1 Dezember 2024
26 November 2024
26 November 2024