Behringer BEQ700 Bedienungsanleitung

Lies die bedienungsanleitung für Behringer BEQ700 (22 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 6 Bewertungen. Hast du eine Frage zu Behringer BEQ700 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Thank you for showing your condence in us by purchasing the

BehringerBASS GRAPHIC EQUALIZER BEQ700. This ultimate eects pedal

is specically designed to match the frequency range of bass guitars.

Itallows 7-band sound shaping and feedback elimination from 50 Hz to

10kHz. It has a powerful 15 dB boost/cut per band, ideally suited even for

5-string and 6-string bass guitars.

1. Controls

(1) The

7-band EQ

faders allow boosting/cutting single frequency

ranges from 50 Hz to 10 kHz at ±15 dB.

(2) The LEVELfader adjusts the output level. It can be used to achieve

eective volume “boost” or “cut.”

(3) This LED illuminates when the EQ is activated. It also serves as a

battery level indicator.

(4) Use the footswitch to activate/deactivate the EQ.

(5) Use this ¼" TS connector to plug in the instrument cable.IN

(6) The ¼" TS connector sends the signal to your amp.OUT

Use the connection at the front of the unit to plug in a 9 V power DC IN

supply (not included).

The is located underneath the pedal cover. BATTERY COMPARTMENT

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

◊

◊

◊

◊ ◊ ◊ The BEQ700 has no on/o switch. As soon as you insert the

jack into the in connector, the BEQ700 begins running.

When not using the BEQ700, remove the jack from the

in connector. This extends the life of the battery.

The is located at the bottom.SERIAL NUMBER

V 1.0

BASS GRAPHIC EQUALIZER BEQ700

Ultimate 7-Band Graphic Equalizer

(2)

(6)

(1) (3)

(5)

(4)

Produktspezifikationen