Behringer Ultra Octaver UO300 Bedienungsanleitung
Behringer
Nicht kategorisiert
Ultra Octaver UO300
Lies die bedienungsanleitung für Behringer Ultra Octaver UO300 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Behringer Ultra Octaver UO300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
ULTRA OCTAVER UO300
3-Mode Octaver Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA OCTAVER UO300.
This high-quality eects pedal creates a monster sound by adding two additional tones using your
guitar—one and two octaves below the original tone. Thanks to its high-performance features you’ll
get natural, clear octave sounds with constant pitch, even for staccato playing.
Octave eect is possible due to a circuitry that generates signals one or more octaves below the input signal.
1. Controls
(1) The selector allows you to optimize the eects pedal for HIGH, MID and LOW frequencies RANGE
and use instruments with dierent frequency ranges (guitar, bass guitar, keyboard, etc.)
(2) The control adjusts the level of the original input signal.DIRECT
(3) The control adjusts the level of the generated signal one octave below the original signal.OCT 1
(4) The control adjusts the level of the generated signal two octaves below the original signal. OCT 2
(5) The blue LED illuminates when the eect is activated. It also serves as a battery level indicator.ON/BATT
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
(8) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power supply (not included). DC IN
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The UO300 has no on/o switch. As soon as you insert the jack into the in connector,
the UO300 begins running. When not using the UO300, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
(5)
(1)
(7)
(4)
(6)
(3)(2)
(8)
ULTRA OCTAVER UO300
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In
Connector ¼" TS
Impedance 500 kΩ
Out
Connector ¼" TS
Impedance 1 kΩ
Power Supply
9 V𝌂, 100 mA regulated
BEHRINGER PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.
Produktspezifikationen
| Marke: | Behringer |
| Kategorie: | Nicht kategorisiert |
| Modell: | Ultra Octaver UO300 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Behringer Ultra Octaver UO300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Behringer
6 Oktober 2024
4 Oktober 2024
22 September 2024
18 September 2024
17 September 2024
15 September 2024
12 September 2024
9 September 2024
5 September 2024
22 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nevadent
- Franklin
- Danfoss
- Wavtech
- Elba
- Exalux
- Defender
- Ambient Weather
- Vasagle
- Ergotools Pattfield
- Kenton
- BLUEPALM
- Drayton
- Sikkens
- JAR Systems
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025