Benefon Twig Beacon Bedienungsanleitung
Benefon
Smartphone
Twig Beacon
Lies die bedienungsanleitung für Benefon Twig Beacon (1 Seiten) kostenlos online; sie gehört zur Kategorie Smartphone. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 21.5 Bewertungen. Hast du eine Frage zu Benefon Twig Beacon oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Publication number: YZ 3415-03
TWIG Beacon
Configuration & Installation guide
All rights reserved. © Twig Com Ltd, 2012.
Due to differences in use, installation and hardware, all settings and functions may not be appli cable to each device
version.
For any further questions please contact Twig Com support at sup port@twi gcom .com or +358 40 510 5058.
1. Installation of Beacons
Beacons can have different power supply options. Typical version
has integrated Lithium pri mary battery giving typical 2-3 years
operating time.
Mount the Beacon to suitable place based on desired radius for
operation. Mounting of the Beacon should not be done against
metal wall or behind other metal materials as they are damping the
si gnal an d can even to tall y bl ock them i s certai n directions.
If the Beacon must be installed to metal wall, there should be used
25mm thick non metal spacer between Beacon and wall or install
the Beacon sideways unless the model is with antenna 90-degrees
tilted like in the picture
Installation direction must be battery downside like in the picture.
Battery direction must not be positive pole downwards in any
installation due to damaging the damage.
Make sure the battery is installed correctly with positive pole to (+)
si gn i n hol der.
Once the Beacon is mounted to desired position it can be turned
on by inserting the jumper. Once the jumper is connected the
Beacon is operational. The LED will blink on transmission interval.
If the Beacon is configuration mode it will blink in 2 seconds
interval with two colours.
.
2. Installing software and drivers
TWIG Beacon configuration tool doesn’t require dedicated USB drivers, as it uses Windows HID. (Human interface
drivers)
Connect TWIG Beacon configuration device to your computer USB port. Allow Windows to install drivers.
Once drivers are loaded run the program Beacon Configure. Program will show
each TWIG Beacon it can currentl y hear. Note that the location of the Beacon
configuration box, that has inside similar transceive r as Beaco n ha s si gni fi cant
effect. Do not place it on metal tabl es of close to metal shelves.
No = Position number to indicate how many beacons are ”visible” to the
configuration program
Name= ID programmed to the unit. If no name is programmed the field will be
empty
Serial number is factory programmed non erasable ID.
Produktspezifikationen
| Marke: | Benefon |
| Kategorie: | Smartphone |
| Modell: | Twig Beacon |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Benefon Twig Beacon benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Smartphone Benefon
24 Juli 2024
20 Januar 2024
25 August 2023
18 August 2023
5 Mai 2023
27 April 2023
27 April 2023
27 April 2023
27 April 2023
27 April 2023
Bedienungsanleitung Smartphone
- O2
- Geemarc
- Telefunken
- Fero
- Neffos
- Easypix
- Best Buy
- Mediacom
- Fysic
- Amazon
- Nordmende
- Vivax
- SilverCrest
- Zipy
- GreatCall
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
16 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025