Berkel 825E-PLUS Bedienungsanleitung
Berkel
Schneidemaschine
825E-PLUS
Lies die bedienungsanleitung für Berkel 825E-PLUS (8 Seiten) kostenlos online; sie gehört zur Kategorie Schneidemaschine. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Berkel 825E-PLUS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
BK45760 Rev. A (February 2015)
MODELS
823E-PLUS, 825E-PLUS,
825A-PLUS, 827E-PLUS,
827A-PLUS, & 829E-PLUS
SLICERS
OWNER/OPERATOR
MANUAL
IMPORTANT NOTICE
This manual contains Important Safety
Instructions which must be strictly
followed when using this equipment.
14 • OWNER/OPERATOR MANUAL BK45760 Rev. A (02-15)
Sharpening Instructions
CAUTION
The knife should be sharpened at a minimum on a daily basis. Do not sharpen a knife that is not
FOHDQ<RXZLOOGDPDJHWKH6KDUSHQLQJVWRQHVDQGEHXQDEOHWRVKDUSHQWKHNQLIH
6ZLWFK2))WKHSRZHU
2. Unplug the slicer.
3. Turn the thickness control knob fully to the right to place the gauge plate in the fully closed
position.
Clean the knife completely. Always clean from the center towards the outside edge of the knife.
1HYHUPRYH\RXUKDQGWRZDUGVWKHHGJHRIWKHNQLIH
5. Loosen the sharpener locking knob, raise and rotate the sharpener until the stones sit with one
on each side of the knife. Retighten the knob to hold the sharpener in its sharpening position.
6. Plug in the slicer and switch on the power.
7. Press the sharpening stone push-button to bring the stone against the knife and hold it for 5 to
VHFRQGVDQGUHOHDVH:KHQWKHVKDUSHQHULVWKHLQWKHVKDUSHQLQJSRVLWLRQWKHVKDUSHQLQJ
stone push-button is on the left side of the knife.
8. Press the deburring stone push-button to bring the stone against the knife and hold it for 2 to 3
seconds and release. When the sharpener is the in the sharpening position, the sharpening stone
push-button is on the right side of the knife.
9. 6ZLWFK2))WKHSRZHU
Return the sharpener to its stored position and lock in place.
Clean slicer before slicing product. (See “Cleaning and Sanitizing instruction”).
<RXUVOLFHULVQRZVKDUSHQHGFOHDQHGDQGVDQLWL]HG²UHDG\WRXVH
SHARPENER MAINTENANCE
7XUQ2))WKHVOLFHUWXUQLQGH[NQREIXOO\WRWKHULJKWDQGXQSOXJWKHSRZHUFRUGIURPWKH
receptacle.
2. Loosen the sharpener locking knob and lift off the sharpener.
3. &OHDQWKHFRYHUZLWKZDWHUDQGGHWHUJHQW&DUHIXOO\FOHDQWKHVKDUSHQHUDVVHPEO\DQGDURXQG
the stones. DO NOT submerge the sharpener assembly. Oil the spindle and bearing assemblies
ZLWK%HUNHO)RRG0DFKLQH2LO
Check the stones. If they do not turn freely, are greasy or are full of metallic build-up, they must
be cleaned. (See “Cleaning the Sharpening Stones”). If the stones are cracked or chipped they
must be replaced.
5. 2LOWKHVKDUSHQHUVKDIWV3ODFHDIHZGURSVRI%HUNHO)RRG0DFKLQH2LORQHDFKVKDIW0RYHWKH
VKDUSHQLQJDQGGHEXUULQJVWRQHSXVKEXWWRQVEDFNDQGIRUWKWRPDNHVXUHWKDWWKHVWRQHVPRYH
in and out easily. Also, rotate the stones to make sure they turn freely.
6. Oil the mounting post.
7. Replace the sharpener. Sharpener must be all the way down protecting the top of the knife.
Lock in place.
16 • OWNER/OPERATOR MANUAL BK45760 Rev. A (02-15)
Repair Parts/Repair Service/Exploded Views
3OHDVHFRQWDFW+REDUW6HUYLFHRU\RXUGHVLJQDWHG%HUNHO6HUYLFH/RFDWLRQ'%6/IRUDQ\UHSDLU
SDUWVUHSDLUVHUYLFHUHTXLUHGRQ\RXU%HUNHOVOLFHU)RUWKHQHDUHVW+REDUWVHUYLFHRI¿FHSOHDVHYLVLW
ZZZKREDUWVHUYLFHFRPDQGWKHQFOLFNRQ³ORFDWHDQRI¿FH´7KHQHLWKHUHQWHU\RXU=,3&2'(RU
VHOHFWDVWDWHWR¿QGWKHFORVHVWORFDWLRQ2U\RXFDQDOVRYLVLWZZZEHUNHOHTXLSPHQWFRPDQGFOLFNRQ
WKH³6HUYLFHWDE´7KHQHQWHU\RXU=,3&2'(WREHVKRZQWKHFORVHVW+REDUWRU%HUNHO'%6/VHUYLFH
ORFDWLRQV2WKHUSURGXFWLQIRUPDWLRQVXFKDV3DUWV&DWDORJVDQG,QVWUXFWLRQ2SHUDWRU0DQXDOVDUHDOVR
DYDLODEOHRQWKHZZZEHUNHOHTXLSPHQWFRPZHEVLWH&OLFNRQWKH³5HVRXUFH&HQWHUWDE´DQGWKHQFOLFN
on the information category you want to read or download. Be sure to enter your product model num-
ber.Additional information may be obtained from:
Berkel Company
2006 Northwestern Parkway
/RXLVYLOOH.<
3KRQH
)D[
www.berkelequipment.com
Produktspezifikationen
| Marke: | Berkel |
| Kategorie: | Schneidemaschine |
| Modell: | 825E-PLUS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Berkel 825E-PLUS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Berkel
24 August 2024
24 August 2024
24 August 2024
24 August 2024
22 August 2024
22 August 2024
22 August 2024
21 August 2024
20 August 2024
20 August 2024
Bedienungsanleitung Schneidemaschine
- Bosch
- Saro
- Beper
- Riviera & Bar
- Bifinet
- Tescoma
- Wilfa
- Powerplus
- RGV
- Clatronic
- Mia
- Princess
- MACH
- Blaupunkt
- ADE
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025