Best Buy BE-CLOPP3 Bedienungsanleitung
Best Buy
Radiowecker
BE-CLOPP3
Lies die bedienungsanleitung für Best Buy BE-CLOPP3 (2 Seiten) kostenlos online; sie gehört zur Kategorie Radiowecker. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Best Buy BE-CLOPP3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Features
• Wake up to the radio or a buzzer
• Listen to either AM or FM stations
• Set snooze or sleep functions
• Program up to two dierent alarms
• Prevent losing the time with the pre-installed CR2025
backup battery
• Charge devices with the USB charging port
Front LED display
Back
Top panel
Setting up your clock radio
1 Pull out the plastic tab to activate the pre-installedCR2025
battery.
2 Connect the power adapter from your alarm clock's power jack to
a power outlet. The hour digits blink on the display.
3 Press (down) or (up) repeatedly to set the correct hour, then
press (radio/clock) to save the setting. The minutes digits
blink.
4 Press (down) or (up) repeatedly to set the correct minutes,
then press (radio/clock) to save the setting.
Notes:
• When you set the clock to a time after noon (12 PM), the PM indicator
lights.
• To set the clock again, press and hold (radio/clock) in standby
mode. When the hours digits blink on the display, repeat steps 3–4.
Before using your new product, please read these instructions to prevent any damage.
Package contents
• Alarm clock radio
• AC power adapter
• CR2025 battery
• Quick Setup Guide
AM/FM Dual
Alarm Clock Radio
Quick Setup Guide
BE-CLOPP3
Rev.B
#
1
2
3
4
5
6
7
Description
• Press and hold to turn the radio on or o.
• Press briey to switch between FM and AM.
With the radio turned o:
• Press and hold to set the clock.
With the radio turned on:
• Press briey to move to the next preset radio station.
• Press and hold for two seconds to save a new radio station preset.
• Press and hold for six seconds to automatically search and save radio stations.
With the radio turned o:
• Press briey to turn Alarm 1 on or o.
• Press and hold to set the alarm time.
With the radio turned o:
• Press briey to turn Alarm 2 on or o.
• Press and hold to set the alarm time.
• Press briey to adjust the screen brightness or to snooze when the alarm is
ringing.
• Press and hold to turn o the alarm when the alarm is ringing
• With the radio turned on, press and hold to set the sleep timer (90 min.,
60 min., 45 min., 30 min., 15 min., or OFF).
With the radio turned on:
• Press to tune the radio to the
previous (down arrow) or next (up arrow) station.
• Press and hold to search for the station automatically.
When setting the clock:
• Press to set the hours and minutes backward or forward.
When setting the alarm:
• Use to adjust the alarm time, select the alarm mode, or adjust the
alarm volume.
Press to raise or lower the volume.
Item
Radio
power
Set /
Radio/Clock
Alarm 1
Alarm 2
Dimmer/
Sleep/Snooze
Up/
Down
+ Raise/
- Lower volume
Using the alarm clock
Setting an alarm
1 Under standby mode, press and hold (Alarm 1). The hours digits
blink.
2 Press (down) or (up) repeatedly to set the correct hour, then
press (Alarm 1) to save the setting. The minutes digits blink.
3 Press (down) or (up) repeatedly to set the correct minutes, then
press (Alarm 1) to save the setting.
4 Press (down) or (up) to select the alarm ring type (“Bu” for a
buzzer sound or “rAd” for the radio), then press (Alarm 1) to save
the setting.
5 Press (down) or (up) to set the volume, then press (Alarm 1)
to save the setting. Alarm 1 is turned on.
Notes:
• To set Alarm 2, follow these instructions, but press (Alarm 2) instead of
(Alarm 1).
• To turn on an alarm that you’ve previously set, press (Alarm 1) or
(Alarm 2). The Alarm 1 or Alarm 2 indicator is shown on the display
when the alarm is turned on.
Quieting an alarm
• Press briey to mute an alarm for nine minutes. You SNOOZE
can snooze as many times as you need within 59 minutes of the
preset alarm time.
• Press and hold SNOOZE to turn o an alarm for 24 hours. The
alarm stays on to ring the next day.
• Press (Alarm 1) or (Alarm 2) briey to cancel an alarm. The
indicator turns o, and the alarm remains o.
Time/Alarm/Frequency display
Sleep timer indicator
PM indicator
Alarm 1 ON indicator
Alarm 2 ON indicator
Using the radio
1 Press and hold (power) to turn on the radio.
2 Press (power) briey to select either the FM or AM band. The
current station is shown on the screen for 10 seconds, then
clock displays.
Note: If you select the FM band, stretch out the FM antenna on the
back of your clock radio to improve FM reception.
3 To tune into a station:
a. Press (down) or (up) repeatedly to nd the station
you want.
b. Press and hold (down) or (up) to search for the next
available station.
Note: The search may not stop at a station with a weak signal.
4 Press + – (raise volume) or (lower volume) to raise or lower the
volume.
5 When you nish listening, press and hold (power) to turn o
the radio.
Back
Power adapter
Back
Speaker
Power jack
USB port
FM antenna
Plastic tab
FM/AM
SET
ALARM
TUNE
VOLUME
DIMMER SLEEP
V4 ENGLISH 23-0195
Saving radio station presets
Your clock radio can store ten station presets for FM and AM
stations.
1 With the radio turned on, press (down) or (up) to search the
radio band (AM or FM) you want, then press and hold (set).
A preset number blinks. (The preset number will automatically
increase each time you set a preset, or you can press down or up
repeatedly to select the preset number you want.)
Tip: Press and hold (down) or (up) to adjust the radio band
more quickly.
2 Press (set) briey to save the station to the preset number,
the station number shows on the screen.
3 Repeat the above steps to save a next station.
Note: To automatically search and save radio stations, turn on the radio,
then press and hold (radio/clock) for six seconds.
Recalling preset stations
With the radio on, press (radio/clock) repeatedly to select the
preset station you want.
Using the sleep timer ( )
1 When listening to the radio, press and hold SNOOZE to set
the sleep timer.
2 Press SNOOZE repeatedly to set the sleep timer for 90 min.,
60 min., 45 min., 30 min.,15 min., or OFF. The radio automatically
turns o after the specied time. You can also change the sleep
timer duration when the remaining time is displayed by
pressing this button repeatedly.
3 To stop listening at any time, press and hold (power).
Charging USB devices
Connect a USB cable (not included) from the clock radio’s USB port to
your smartphone, tablet, or other USB device.
Note: The reception sensitivity on the radio may worsen when charging a
smartphone through the USB port.
Adjusting the LED brightness ( )
Press SNOOZE repeatedly to adjust the display’s brightness level.
Maintaining your clock radio
Use a soft, dry cloth to clean the exterior of your clock radio. For
stubborn stains, dampen the cloth with a weak solution of mild
detergent and water, then immediately dry.
Note: Do not use abrasive cloths, thinners, alcohol, or other chemical
solvents, because they may damage the nish or remove the panel lettering.
Specications
• Dimension (H × W × D): 3.2 × 7.9 × 2.2 in. (8.1× 20 × 5.7 cm)
• Weight: 0.7 lbs. (0.3 kg)
• Power requirements: AC 120 V, 60 Hz
• Power consumption: 6 W
• Tuner:
Band: FM and AM
Range: FM – 87.5~107.9 MHz | AM – 520~1710 KHz
Presets: 20 for AM and FM
• USB port: 5 V/1 A
• Backup battery: CR2025 battery
Troubleshooting
No power
• Make sure that the power adapter is connected securely and
correctly to the power outlet.
• Make sure that the power outlet is working.
No sound from the speakers
• Press +
(raise volume) to increase the volume.
• Make sure that the power adapter is connected securely and
correctly to the power outlet.
• Make sure that your clock radio is turned on.
Static or noise when playing the radio
• Make sure that the station is tuned correctly and that the station
has a good signal.
• Try another station.
• For FM stations, extend or rotate the antenna wire to improve
the reception.
• For AM stations, adjust the position of your clock radio and
unplug the USB charging cable (if connected) for the best
reception.
The sound is distorted
• Make sure that the volume level is not set too high.
• Make sure that the station is tuned correctly and that the station
has a good signal.
The clock radio gets warm after extended play at high volume
levels
• This is normal. Turn down the volume to let the radio cool.
Safety information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult an electrician for replacement of
the obsolete outlet
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
WARNING and the following or equivalent,
• To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
• The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. This device
complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
ICES Statement
CAN ICES-3 (B)/NMB-3
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call 866-597-8427 (U.S. and Canada)
www.bestbuy.com/bestbuyessentials
Best Buy essentials is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2023 Best Buy. All rights reserved.
Produktspezifikationen
| Marke: | Best Buy |
| Kategorie: | Radiowecker |
| Modell: | BE-CLOPP3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Best Buy BE-CLOPP3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Radiowecker Best Buy
29 August 2025
Bedienungsanleitung Radiowecker
- Lenco
- Hyundai
- Sonoro
- Insignia
- WE
- Doro
- Krontaler
- Kunft
- Bigben
- Timex
- Nikkei
- Clas Ohlson
- Naxa
- Grundig
- Tchibo
Neueste Bedienungsanleitung für -Kategorien-
25 August 2025
24 August 2025
24 August 2025
23 August 2025
22 August 2025
19 August 2025
18 August 2025
18 August 2025
18 August 2025
18 August 2025