Bestway 68088 Bedienungsanleitung

Bestway Zelt 68088

Lies die bedienungsanleitung für Bestway 68088 (2 Seiten) kostenlos online; sie gehört zur Kategorie Zelt. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Bestway 68088 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Trademarks used in some countries under license from/

Marques utilisées dans certains pays sous la licence de/

Marcas comerciales utilizadas en algunos países bajo la licencia de/

Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/

Marchi utilizzati in alcuni paesi concessi in licenza a

Bestway Inflatables & Material Corp., Shanghai, China

Manufactured, distributed and represented in the European Union by/

Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y representado en la Unión Europea por/

Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e rappresentato nell'Unione Europea da

Bestway Europe S.p.a., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy

Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica por/Distribuído na América Latina por

Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile

Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia

Tel: Australia: (+61) 2 9037 1388; New Zealand: 0800 142 101

Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL

Exported by/Exporté par/Exportado por/Exportiert von/Esportato da

Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited

Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong

www.bestwaycorp.com

68088

303021228916

Owner’s Manual

Model No.#68088

COOLGROUND 3 Tent

INTRODUCTION

Proper Use

Any use other than that described or any modification of

the product is not permissible and may result in injury

and/or damage to the product. The manufacturer is not

liable for damage caused by improper use. The product is

not intended for commercial use.

Description of parts and features

ASSEMBLY

Setting up the tent

WARNING

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

Keep all flames and heat sources away from this tent

fabric. We recommend that you always position your tent

upwind from a camp fire. This will reduce the chances of

having embers land on your tent. In case of fire, please

find the exit to escape from the fire.

Never set up the tent near the river, under the tree of

other objective hazards.

Keep exits clear.

Make sure ventilation openings are open all the time to

avoid suffocation.

SAVE THESE INSTRUCTIONS

Tent Dimensions：

Outer tent: 210cm x 210cm x 120cm

Pitching dimension: 220cm x 220cm

FIG1

FIG2

FIG3

45°

FIG4

WARNING: Poles contain fiber glass. We strongly

recommend wearing gloves during assembly to avoid

irritating hands.

1. Lay the inner tent<E> on the ground. Pull the four

corners outwards.

Note: Make sure that the channels for the poles<B1>

are facing upwards.

Note: Make sure that the zip on the entrance to the

tent is closed.

2. P

ush the poles<B1> completely into the channels.(FIG1)

3. Stand the inner tent<E> up and push the ends of the

poles<B1> into the iron bars (which are on the each

corner of the inner tent<E>.(FIG2)

4. Fasten the roof of the inner tent<E> onto the pole

junction with the sewn-on tie.(FIG2)

5. N

ow cover the outer tent<A> and hook the 4 loops.(FIG3)

6. Fit poles<B2>. Support the tent’s entrance with the

assembled poles<B2>.(FIG3)

7. Secure the tent by pushing the tent pegs<D> into the

ground loops.(FIG3)

8. Tie one end of the guy ropes<C>onto the four corner

hoops of outer tent<A>.(FIG4)

9. T

ie the other end onto the tent pegs<D> and fasten

them by inserting the tent pegs<D> into ground.(FIG4)

10. Ensure that guy ropes<C> are about at an Note:

angle of 45°.

11. Do not pull the guy ropes<C> too tight.

DISASSEMBLE AND MAINTENANCE

Follow steps 1-11 in reverse order.

1. Clean the tent and remove any stains with sponge

and cool water. Please use non-detergent soap for

serious cleaning.

2. Never machine wash or machine dry the tent. Hand

wash and air dry.

3. Please allow all parts to dry thoroughly before you

repack the tent. This will prevent the formation from

mould, bad odours and discoloration

4. Stitch with thread to repair minor leaks, fabrics and

plastic sheets damage. Use ropes to connect broken

frame parts. Use tapes to repair the coating broken

parts.

5. Silicone spray could be use onto zippers if stick.

STORAGE

Store the tent in the stuff sack and place it in a cool, dry

area out of sunlight and away from heat sources and

rodents.

outer tent

1PC

long pole

2PCS

short pole

2PCS

guy rope

6PCS

peg

10PCS

inner tent

1PC

carry bag

1PC

manual

1PC

Produktspezifikationen

Marke:	Bestway
Kategorie:	Zelt
Modell:	68088
Breite:	2100 mm
Tiefe:	2100 mm
Gewicht:	2764 g
Produktfarbe:	Black, Blue, Yellow
Höhe:	1200 mm
Zweck:	Camping
Verpackungsbreite:	590 mm
Verpackungstiefe:	135 mm
Verpackungshöhe:	125 mm
Paketgewicht:	2806 g
Verpackungsart:	Tragetasche mit Header-Karte
Tragetasche:	Ja
Anzahl der Türen:	1 Tür(en)
Mindestbestellmenge:	8 Stück(e)
Belüftung:	Ja
Material innen:	Polyester
Atmungsaktiv:	Ja
Montagezeit:	8 min
Stangenmaterial:	Fiberglas
Netz enthalten:	Ja
Anzahl der Schlafplätze:	3 Person(en)
Bodenwischlappen:	Ja
Tasche:	Ja
Taschenanzahl:	1 Taschen
Moskitonetz:	Ja