Bestway Swim Safe ABC 32298 Bedienungsanleitung

Bestway Nicht kategorisiert Swim Safe ABC 32298

Lies die bedienungsanleitung für Bestway Swim Safe ABC 32298 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 3 Bewertungen. Hast du eine Frage zu Bestway Swim Safe ABC 32298 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

1 / 2

Instruction Manual

Manual ID 2023M-00298

Baby Boat Manual

USER MANUAL FOR SWIM SEAT

WARNING

THE SUPERVISOR SHOULD BE WITHIN ARM’S REACH OF THE WEARER.

INFLATE AND FIT

1. Open the safety valve, squeeze the valve at the base and inflate the air chamber by blowing or using a manual pump (Pump is not included).

Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. Close the valve firmly when finished. Press the

valve downward into the air chamber, to the same level of the surface. After inflation, submerge the baby seat in water to check for leakage. If

air bubbles are found in water, stop using the product.

Note: Never over-inflate.

2. Put the baby seat in water and place the baby in the seat with legs through the holes. The baby seat is only to be used in water where the baby

can not reach the bottom or stand up. When using the product, make sure the water level is underneath the bottom of the external ring of the

product during use. A baby can only start using this product when the baby has the ability to sit up straight.

3. Warning: Do not bite or chew the product as pieces that may be bitten off from the material and become choking hazards.

4. The use of diapers or any other apparel or device shall not lead to an entrapment of the child inside the seat.

REMOVE AND DEFLATE

1. Carefully remove the baby from the seat. Pull stopper out of valve and squeeze to release air.

MAINTENANCE AND STORAGE

1. Rinse with water and air dry thoroughly before storing it. Place it in a dry place, normal room condition, out of direct sun light and the deflated

swim seat should not be compressed by other weights on it.

2. Check for tear and wear regularly. Do not use a product with defect.

NOTE: With proper maintenance and storage, the product life span is 4 years from the date of manufacture. You should thereupon accordingly

replace the product.