Big Agnes Bitter Springs UL1 Tent Bedienungsanleitung

Lies die bedienungsanleitung für Big Agnes Bitter Springs UL1 Tent (2 Seiten) kostenlos online; sie gehört zur Kategorie Tenten. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 13 Bewertungen. Hast du eine Frage zu Big Agnes Bitter Springs UL1 Tent oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Cut here to remove. Do Not Tear!

BITTER SPRINGS UL SET UP INSTRUCTIONS

1. Remove contents from stu sack. Spread tent body out on ground.

2. Stake out the four corners of the tent.

3. Assemble the pole. To ensure each pole section is fully seated insert each pole

section into the next by hand, instead of allowing the shock cord to snap them

together.

4. Insert the pole tips into each Jake’s Foot at the side of the tent.

5. Attach the Twist Clips to the pole and stake out the sides of the body.

6. Go to the back of the tent, locate the black pocket and insert the tip of your trek-

king pole in it. If you will be using the tent without the y then and stake out

the guyline. If you will be using the tent with the y then you can wait to guy out

this point.

7. Drape the rain y over the body aligning the Jake’s feet of body with the cor-

responding hooks on the y.

8. On the underside of the y, there are Velcro straps behind each guy-out loop.

Ax the Velcro straps around the pole.

9. Make sure the webbing at the corners of the rainy is completely slackened. At-

tach each of the hooks at the side of the rainy to the corresponding Jake’s Foot

at the side of the tent body.

10. Stand in front of the y door and locate a webbing loop at the black reinforced

patch on the underside of the y. Insert the tip of your trekking pole in the web-

bing loop, adjust the height and stake out the vestibule at the front.

11. Go to the back of the tent, locate the black pocket on the tent body, and insert

the tip of your trekking pole into that pocket. Locate the webbing loop at the

reinforced black patch on the rainy and insert the black pocket with the pole in

it. Adjust the height and stake out the y at the back.

12. Stake out the rest of the guylines

13. Walk around your tent and make any necessary adjustments.

Separate 6”, large diameter pole segment included for emergency eld repair.

Slide repair pole over the break to act as a splint.

Hardware:

Bitter Springs UL Tent Top View

Twist Clip

Jake’s foot

assembly

Bitter Springs UL Fly Top View

Produktspezifikationen