Black Box AlertWerks EME1TH1 Bedienungsanleitung

Lies die bedienungsanleitung für Black Box AlertWerks EME1TH1 (3 Seiten) kostenlos online; sie gehört zur Kategorie Luftbefeuchter. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu Black Box AlertWerks EME1TH1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

February 2010

MT1000A-85-R4

Measures temperature from -40 to +167° F

in 1° F increments. Measures 0 to 100% relative

humidity with 1% resolution and accuracy

of ±3% at 77° F.

AlertWerks™ Dual Temperature/Humidity Sensors

EME1TH1-001

EME1TH2-005

EME1TH3-015

To continue, turn this page over…

Humidity:

Communications Cable — RJ-45 jack to humidity sensor

using UTP CAT5 wire

Dual Sensor — Automatically detected by the hub

Measurement Accuracy — ±4.1 at -40° F, minimum ±0.9

at 25° F, ±4 at 167° F

Relative Humidity —0 to 100%

Resolution — 1% for the hubs and 0.1% for the base units

Sensor Element —Can get wet without damage

Power —Powered by the hub (no additional power needed);

Power consumption: Typical 7.25 mWatt, 1.45 mA

Specifications

Temperature:

Communications Cable — RJ-45 jack to temperature sensor

using UTP CAT5 wire

Measurement Accuracy — Maximum ±4.1 at -40° F,

minimum ±0.9 at 68° F and ±4 at +167° F (Maximum ±2.3

at -40° C, minimum ±0.4 at 25° C and ±1.7 at +75° C)

NOTE: The Temperature/Humidity Sensors never need

calibration.

Measurement Range — -40 to +167° F (-40 to +75° C)

Measurement Rate — One reading every second

Measurement Resolution —1° F (1° C) when used with the

EME102A and EME108A; 0.9° F (0.5° C) when used with

the EME134A

Sensor Type — Semiconductor microprocessor controlled

Power —Powered by the hub (no additional power needed);

Power consumption: Typical 10.70 mWatt, 2.14 mA

Produktspezifikationen