Blaupunkt BPDW8913WR Bedienungsanleitung

Lies die bedienungsanleitung für Blaupunkt BPDW8913WR (1 Seiten) kostenlos online; sie gehört zur Kategorie Kamera. Dieses Handbuch wurde von 46 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 23.5 Bewertungen. Hast du eine Frage zu Blaupunkt BPDW8913WR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

When the camera is xed, put the lead-wire of the camera through the car trunk.

Notice

Camera Emitter

Installation instructions for the camera:

Installation instructions for the emitter:

rear lamp

Notice

Speci cations

Packing ListInstallation

Operations for Android system client

Operations for iOS Apple system client

Installation app Software

Settings:

WIFICAMERA

Not in range

.

* When set WIFI signal to connect the mobile phone, please close the WIFI signal

previously opened.

image display time is relate to the CPUmemory, software version, working

software number of mobile phone.

* when the background is black or the image is still, please exit the APP, and check

whether the wifi connection isnormalthen click againthe APP iconto enter into

the software interface.

* ,

Notice

Connection WiFi:

WIFICAMERA

Secured with WP2

WI FI CA ME RA

1. Turn on the iOS device and enter the App Store

2. Search “Sight Wi” app.

3. Install the Sight Wi app

Installation app Software

Connection WiFi:

WIFICAMERA

View the video:

G

Notice

The specic steps to clear network memory are as follows. and then follow the above WIFI connection 

method to reconnect the new network.

Press this icon to enter into the settings menu. Youcan change the default factory

SSID and passwordofthe wifi camera tool, and clicking will show whether the change

is successful, and clicking to cancel the new SSID set.

Settings:

* When set WIFI signal to connect the mobile phone, please close the WIFI signal

previously opened.

image display time is relate to the CPUmemory, software version, working

software number of mobile phone.

* when the background is black

click againthe APP iconto enter into

the software interface.

* ,

or the image is still, please exit the APP, and check

whether the wifi connection isnormalthen.

Notice

WI FI CA ME RA

WP2 PSK

Passw ord

Secur ity

Connect Cancel

4. After adjustment, drill a second hole, then

mount and tighten to nish camera installation

3. Move the camera orientation to adjust the

display eect

2. Use a Screwdriver to ensure that the rst 

screw is properly screwed into the drill hole.

1. In the proper position of rear license plate

drill a hole for mounting screws

View the video:

WIFI car rear view

Night Vision Range>3m

Power Supply12V DC

Video output0.9Vp-p. 75Ω ~1 2

Consumption Current150mA MAX

Image Sensor1/4inch CMOS

Minimum illumination<5 Lux

Electronic Exposure Time1/60s-12ns(NTSC) sec

1/50s-12.5ns(PAL)sec

Horizontal View Angle

Storage Temperature

Operation Humidity15%~85%RH

Operation Temperature

Dimensions370 X 55 X 35MM

Weight 140g

Items GL8912

640×480pixels

Effective Pixels

Video FormatNTSC/PAL

80O

O

- 10~ C+50

O

- 20~ C+60

WIFI transmitter box

Wireless Protocol

Modulation Mode

Transmission Distance

With No Obstacle

Weight

Operation Voltage12V DC

Operation Frequency2400 2483.5MHz-

IEEE 802.11b, IEEE 802.11g,

IEEE 802.n (1T1R Modes)

Operation Current150mA(MAX)

Encryption ModeWPA2

802.11b：DSSS (CCK, DQPSK,

DBPSK)•802.11g/n：OFDM

(BPSK, QPSK, 16QAM, 64QAM)

≥10m

60±5g

Operation Temperature

Dimensions71 35.5 12.3MM X X

Storage Temperature

Operation Humidity20%~90%RH

Items GT4068

O

- 10~ C+50

O

- 20~ C+60

SettingsConnecting CameraLogo

Settings

BPDW8913WR

2.4GHz Digtal Wireless

Car Rearview System

Open the APP, if the connection between the wi tool and the mobile device is 

successful the app will be highlighted. Then the image would be transmitted from the

camera to the app. As shown in the gure below, the camera is showning real-time 

monitoring in the app. The user would also be able to press icon to refresh the image

Open the APP, if the connection between the wi tool and the mobile device is 

successful the app will be highlighted. Then the image would be transmitted from the

camera to the app. As shown in the gure below, the camera is showning real-time 

monitoring in the app. The user would also be able to press icon to refresh the image

2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device

is “WIFICAMERA”. Then type in the password of the devices

(Default password: 88888888).

1. Click on the “ ” icon.

Wi-Fi

2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device

is “WIFICAMERA”. Then type in the password of the devices

(Default password: 88888888).

1. Click on the “ ” icon in the main interface of the iOS device.

* Never reverse the positive and negative pole. Reversing the poles

can damage the emitter box and camera, rendering them unusable.

* The positive and negative pole of the emitter box’s power cable are connected

to the positive and negative pole of the rear lamp of the car.

* The antenna of the emitter box should not be placed near any metal part of the car.

This can negatively eect the emitting distance and image transmission.

1. Turn on the Andriod Phone and enter the Google Play Store

2. Search “Sight Wi” app.

3. Install the “Sight Wi” app

Wi-Fi

* User could press the RESET button of the emitter to renew the default factory

SSID and password.

* When the user changes the SSID and password, the user shall forget the network in the

"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.

Press this icon to enter into the settings menu you can change the default factory SSID

and password of the wifi camera tool, and clicking will show whether the change is successful,

and clicking to cancel the new SSID set.

* User could press the RESET button of the emitter to renew the default factory

SSID and password.

* When the user changes the SSID and password, the user shall forget the network in the

"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.

Connecting

Camera

Take a

Photo

Record

a Video

Video

Playback

* All the specications are subject to minor change without prior notice

License Plate

Nuts & Bolts

License Plate

Screws (Optional)

In-line Wire

Connectors

GrommetCable Ties

Black-

Red+

The specic steps to clear network memory are as follows. and then follow the above WIFI connection 

method to reconnect the new network.

Produktspezifikationen