Blustream IP510UHD-TZ Bedienungsanleitung
Seiten 2 Nicht kategorisiert
Lies die Bedienungsanleitung für Blustream IP510UHD-TZ kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 21 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
Simultaneous UHD Video over IP - Transceiver
IP510UHD-TZ
Description
The Blustream IP510UHD Transceiver is a SDVoE Compliant
AV over IP solution that provides the highest-quality,
uncompromised 4K with zero latency Audio/Video extension
over copper or optical bre 10G network. The IP510UHD-TZ
is capable of simultaneously encoding HDMI video source
material whilst decoding a separate HDMI stream from within
the SDVoE network, and includes support for distribution of
HDR (High Dynamic Range), 10 / 12-bit colour content and
multi-channel HD audio signals.
The IP510UHD-TZ provides advanced features including
PoE+ and transmission of multiple control and data signals
alongside audio and video, including IR, RS-232,USB (KVM)
and 1Gb Ethernet. The IP510UHD-TZ is ideal for 18Gbps HDMI
installations where multiple transceivers can be combined
with one or more 10GbE copper / bre switches to form a
distributed video matrix, multi-viewer, or video wall system.
Key Features
•
Simultaneous encoding and decoding of 18Gbps UHD Video
over 10Gb network with visually lossless compression and
zero latency
• Supports HDMI 2.0 18Gbps specication with pass-through
for up to 4K 60Hz 4:4:4 and 10/12-bit HDR sources, including
Dolby Vision*
• Supports video scaling and single-frame switching
• Supports all known digital HDMI audio formats including
Dolby TrueHD, Atmos, DTS-HD Master Audio and DTS:X
transmission
• Supports xed signal routing function for IR, RS-232, CEC and
USB
• USB 1.1 end to end/point to point pass-through for KVM
• Analogue L/R audio embedding and audio breakout
(balanced and unbalanced)
• Bi-directional 10/100/1000BaseT Ethernet pass-through
• Supports bi-directional 5V or 12V IR pass-through
• PoE+ (Power over Ethernet) to power Blustream products
from PoE+ switch
• HDCP 2.2 compliant with advanced EDID management
• Local 12V 2A power supply (should Ethernet switch not
support PoE+)
• Features 4 operational modes:
- Matrix distribution (requires 10Gb network switch)
- Video Wall (requires 10Gb network switch)
- Multiview mode (requires 10Gb network switch)
- One-to-one HDMI extender (no network switch required)
Blustream cannot be held responsible for errors in typography or photography. Specications are subject to change without notice.
*HDR and Dolby Vision content requires Genlock mode to be enabled (video scaler in passthrough mode)
37mm
195mm
Produktspezifikationen
| Marke: | Blustream |
| Kategorie: | Nicht kategorisiert |
| Modell: | IP510UHD-TZ |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Blustream IP510UHD-TZ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten