Bobrick B-9806 Bedienungsanleitung
Bobrick
Nicht kategorisiert
B-9806
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Bobrick B-9806 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂźr 5 Personen hilfreich und wurde von 3 Benutzern mit durchschnittlich 4.4 Sternen bewertet
Seite 1/2
1
4
Š 2021 by Bobrick Washroom Equipment, Inc.
Form No. 9806-9807-75_ii Issued 6/21/21 Printed in U.S.A.
In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.
Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: (818) 982-9600, FAX: (818) 503-1102
New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: (518) 877-7444, FAX: (518) 877-5029,
or e-mail: customerservice@bobrick.com
In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY
45 Rolark Drive, Scarborough, Ontario M1R 3B1 ⢠Eastern Canada: Tel: (877) 423-6555 ⢠FAX: (877) 423-8555
⢠Western Canada: Tel: (877) 423-6444 ⢠FAX: (877) 423-8444
BOBRICK.COM
Installation Instructions for Grab Bars
B-9806 and B-9807
îno collection
NOTE:
For Installation on
a. Dry-Walls
b. Glass-Partitions and Metal Partitions as well as
c. âback-to-back-installation of two grab bars against each other from
opposite sides of partition-panels (glass and any other partition
material)
Please see separate installation instructions of respected installation kits.
Required Tools
a. Spanner (preferably ring end) 13mm (similar to ½")
b. Laser/Spirit level
c. Phillips head screwdriver
d.î sixîpcs.î#10îsheetîmetalîscrews,îîatîhead,îstainlessîsteel,îlengthîî î
depending on application (e.g. 1/2" length for 1/2" CL-partitions and 1â
length for 1â thick particle board)
3
2
âExplodedâ overview of the grab bar îange:
5. Fit Bolt (M8 Screw) & Knurled Washer through Half-Moon Washer.
1.î Securelyîîżxîîange-basesîtoîpanel/wallîatîcorrectîpitchîî î î
î (18"/24"/36"/42")îusingîtheîappropriateîîżxingsî(seeîalsoîPCD-Pitchîî î
Circle diameter). Ensure a minimum of 6" from corners/returns so that
a spanner can be used later.
2î Useîbaseîîangeîasîaîtemplateîtoîmarkîdrillingîholesîonîtheîwallîwithîaîî
pencil.
î Baseîîangeîhasî3îpcs.îofî5.0mmî(3/16")îmountingîholes,îequallyîî î
spaced 120° apart on a 38.0mm (1-1/2") Bolt/Pitch Circle
Diameter (BCD/PCD).
î Bobrickîrecommendsîusingî#10îSheetîmetalîscrews,îîatîhead,îlengthîî
î dependingîonîapplication.îScrewîheadsîwantîtoîbeîbelowîîush.îUseîaîî
level to assist in laying out.
Screw- and drilling examples :
î a.îî #10îsheetîmetalîscrew,îîatîhead,î1/2"îscrewîlengthîforî1/2"îî î
CL-partitions, 3/16" predrill
î b.î #10îsheetîmetalîscrew,îîatîhead,î1"îlengthîforî1"îthickîparticleîî î
board, 9/64" predrill
3.î Fitîtheîîangeîcoversîonîbothîîangesîwithîtheîbevelledîedgeîfacingîout.
6. With the slots in the tube facing down, pass the thread of the bolt (M8 Hex Screw)
through the slot in either end of the tube from the inside. Hold the tube and gently
twist to help the bolt (M8 Hex screw) pass through the slot. Repeat for other end
î ofîtheîtubeîwhileîkeepingîtheîslotsîfacingîdownîtoîavoidîlosingîtheîpartîjustîîżtted.îî
Make sure the shape of the half-moon washer is aligned with the inside diameter
of the tube.
7.î Pushîbothîthreadedîboltsî(M8îHexîScrews)îintoîîangeîendîholeîandîîî
î îżngerîtightenîusingîtheîknurledîwasherîonîtheîboltî(M8îHexîî î î
Screw). Ensure the radius on the pillar matches the radius of the tube.
Tighten both ends with the ring end of a 13mm spanner making sure not to damage the tube with the spanner.
Fit end caps making sure to locate the screwdriver release recess facing down out of casual observation.
4.î PlaceîPillarsîonîbothîîangesîwithîîatîendîtoîîangeî(îangeîcover).
1. Flange Base
2. Flange Cover
3. Pillar
4. Half-Moon-Washer
5. Knurled Washer
6. M8 - Screw, hex head
(13mm, 1/2" or 9/16")
Produktspezifikationen
| Marke: | Bobrick |
| Kategorie: | Nicht kategorisiert |
| Modell: | B-9806 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bobrick B-9806 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Bobrick
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
26 September 2024
24 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nicht kategorisiert Coline
- Nicht kategorisiert True
- Nicht kategorisiert SolaX Power
- Nicht kategorisiert Bryton
- Nicht kategorisiert Alphatronics
- Nicht kategorisiert Primacoustic
- Nicht kategorisiert Anton/Bauer
- Nicht kategorisiert Traeger
- Nicht kategorisiert Elektron
- Nicht kategorisiert Shark
- Nicht kategorisiert Chauvin Arnoux
- Nicht kategorisiert Flycam
- Nicht kategorisiert Steren
- Nicht kategorisiert Astropet
- Nicht kategorisiert Atmotube
Neueste Bedienungsanleitung fĂźr -Kategorien-
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025