Bogen ASWB1 Bedienungsanleitung

Bogen Lautsprecher ASWB1

Lies die bedienungsanleitung für Bogen ASWB1 (2 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 53 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 27 Bewertungen. Hast du eine Frage zu Bogen ASWB1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

Amplified Wall Baffle Speaker

Model ASWB1

Installation and Use Manual

Description

Bogen’s self-amplified wall baffle speaker is an 8-inch, cone-type loudspeaker, complete with built-in 1W amplifier

and volume control mounted in a wood grain baffle (WB8). The ASWB1 requires 1 Current Unit (CU) of power.*

*1CU = 50mA

Installation Instructions for ASWB1

The loudspeaker should be installed at a recommended height of 8 to 12 feet above the floor, depending on need.

Note: Do not mount the speaker near noise generating equipment (fans, motors, etc.) and do not use where a

normal conversation cannot be conducted.

1. Mark the point from which to hang the speaker. Drill an appro-

priately sized hole in the wall and insert an anchor. Drive a

screw into the anchor leaving approximately 1/2 of the screw"

exposed from which to hang the speaker.

2. Make electrical connections. Power (24V DC) and audio are

supplied to each speaker via separate 2-terminal pluggable

connectors. When two or more speakers are used in a single

paging station, wire all audio and power supply connections

in parallel.

Power supply connections are made at the 24V DC screw ter-

minals marked "PLUS +" and "MINUS – ". The speaker power

input is not polarity sensitive and will also work properly if the

polarity is reversed.

Audio Input connections are made at the screw terminals

marked “TIP” and “RING.” Connect all TIP terminals together

and all RING terminals together. Reversing these connectors

on a speaker will cause it to cancel bass response of adjacent

speakers.

3. If it is necessary to adjust the volume, insert a thin, flat

blade screwdriver into the access hole at the bottom of the

wall baffle, then turn the volume control clockwise (as

viewed from the bottom front of the baffle) to increase the

volume.To reduce the volume, simply turn the volume con-

trol counterclockwise. Be careful not to unhook the speaker

from the wall anchor.

Specifications subject to change without notice.

54-2133-01C 1007

BOTTOM

OF SPEAKER

WALL

HANGER

NOTCH

RECESSED VOLUME CONTROL

Turn in a clockwise motion (as

viewed from front of speaker)

to increase volume.

POWER

CONNECTOR

AUDIO

CONNECTOR

Produktspezifikationen

Marke:	Bogen
Kategorie:	Lautsprecher
Modell:	ASWB1
WLAN:	Nein
Bluetooth:	Nein
Breite:	241.3 mm
Tiefe:	104.78 mm
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	2000 Ohm
Höhe:	241.3 mm
Energiequelle:	AC
RMS-Leistung:	1 W
Equalizer:	Nein
Typ:	Unterputz/auf Putz/Decke Lautsprecher
Gehäusematerial:	Stahl
Stromstärke:	0.05 A
Audio Kanäle:	1.0 Kanäle
Energiebedarf:	24 VDC
Gerätetiefe (inkl. Fuß):	133.35 mm
Anzahl des Antriebs:	1
Frequenzbereich:	100 - 10000 Hz
Mikrofon-Eingang:	Nein
Woofer:	Nein
Hochtöner:	Nein
Fernbedienung:	Nein
Anzahl enthaltener Produkte:	1 Stück(e)
USB erfordert:	Nein
Lautsprecherplatzierung:	Deckenmontage möglich
Subwoofer-Treiberdurchmesser (imperial):	8 "
Bass-Justage:	Nein
Lautsprechergehäuse:	Geschlossen
Verstärker:	Eingebaut
Bass-Reflex:	Nein
Schallldruckpegel:	92 dB
Bassoptimierung:	Nein