Bosch SMP6EMC64M Bedienungsanleitung

Lies die bedienungsanleitung für Bosch SMP6EMC64M (2 Seiten) kostenlos online; sie gehört zur Kategorie Spülmaschine. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 8 Bewertungen. Hast du eine Frage zu Bosch SMP6EMC64M oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

en

Quick reference guide Dishwasher

9001974183 (050724) SMP6EMC64M

*9001974183*

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home ConnectSetting up Home Connect

Tip: Connect your appliance to a mobile device. You can con-

veniently change all settings using the HomeConnect app.

1.

Scan the following QR code.

You can install the HomeConnect app

and connect your appliance via the QR

code.

2.

Follow the instructions in the HomeConnect app.

Overview of water hardness settingsOverview of water hardness settings

You can find an overview of the water hardness values that can be

selected here.

A table of country-specific units can be found in the instruction

manual.

Hardness

range

mmol/lSettingLED ALED BLED C

Soft0 - 1.10

Medium1.2 - 2.91

Hard3.0 - 3.72

Hard3.8 - 8.93

Setting the water softening systemSetting the water softening sys-

tem

1.

Press .

2.

To open the appliance settings,

press for 3 seconds.

flashes.

3.

Press repeatedly until the right

water hardness has been set.

0, 1, 2 or 3 LEDs will light up ac-

cordingly.

4.

To save the settings, press

for 3 seconds.

Adding special salt Salt refill indicatorAdding special salt

To avoid damage to the appliance, only add special

salt to the dispenser for special salt just before the

programme starts.

1.

Unscrew the lid of the dispenser for special salt

and remove.

2.

On initial start-up: Fill the dispenser right up with

water.

3.

Add the special salt to

the dispenser. The water

in the dispenser is dis-

placed and forced out.

Never add detergent.

Funnel

4.

Place the lid back on the dispenser and turn to

close.

Adding rinse aid Rinse aid refill indicatorAdding rinse aid

1.

Press the catch on the

lid of the dispenser for

rinse aid and lift .

2.

Add rinse aid up to the

max mark.

3.

Close the lid of the dispenser for rinse aid.

The lid clicks into position.

Adding detergent DetergentAdding detergent

1.

Add the detergent to the

dry detergent dispenser.

2.

Close the lid of the de-

tergent dispenser.

The lid clicks into posi-

tion.

How to use your applianceHow to use your appliance

1.

Load the tableware.

Only clean tableware that is suitable for dish-

washers. Remove large remnants of food from

the tableware. Check that the spray arms can ro-

tate freely.

2.

Add detergent.

3.

Switch on the appliance .

4.

Select the programme.

5.

Start the programme .

6.

Remove the tableware at the end of the pro-

gramme.

7.

To cancel the programme, press for

approx. 4seconds.

The programme is cancelled and ends after ap-

prox. 1minute.

ProgrammesProgrammes

The programme data has been meas-

ured in the laboratory according to

European standard EN60436.

The consumption figures depend on

the programme and additional func-

tion selected.

The running time will change if the

rinse aid system is switched off or

rinse aid needs to be added.

Programme1) Duration [h:min]

2) Energy consump-

tion [kWh]

3) Water [l]

Intensive 70°

1) 2:05 -2:15

2) 1.300 -1.400

3) 11.5 -13.5

Auto 45-65°

1) 1:40-2:45

2) 0.900-1.500

3) 7.0-15.5

Eco 50°

1) 3:35

2) 0.539

3) 9.5

Express 65° - 1h

1) 1:00

2) 1.300

3) 10.5

Express 45°

1) 0:29

1

2) 0.900

3) 10.3

Favourite

1) 0:15-0:15

2) 0.050-0.050

3) 4.0-4.0

1

half standard load

Produktspezifikationen