Bose Panaray MB4 Bedienungsanleitung
Bose
Lautsprecher
Panaray MB4
Lies die bedienungsanleitung für Bose Panaray MB4 (21 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 17 Bewertungen. Hast du eine Frage zu Bose Panaray MB4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/21
1
PANARAY® MB4 Modular Bass Loudspeaker
Installation Guide*
Installationsvejledning*
Installationsanleitung*
Guía de instalación*
Guide d’installation*
Guida all’installazione*
Installatiehandleiding*
Installationsanvisning*
*For use by trained installers only
*Kun til brug for erfarne installatører
*Montage ausschließlich durch
ausgebildetes Installationspersonal
*Para uso exclusivo de instaladores capacitados
*Réservé aux installateurs ayant suivi une formation
*Solo per l’uso da parte di installatori professionisti
*Uitsluitend voor gebruik door ervaren installateurs
*Ska endast användas av utbildade installatörer
2
DECLARATION OF CONFORMITY
We, the offerer:
Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA
acknowledge our sole responsibility, that the product:
Kind of equipment: Loudspeaker
Type designation: Panaray
® MB4 Modular Bass Loudspeaker
In accordance with EMC Directive 89/336/EEC and Article 10(1) of the Directive,
is in compliance with the following norm(s) or document(s):
Technical regulations: EN50081-1, EN50082-1
Accredited by:
Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA
January 15, 2001
Bose Products B.V. Nic Merks
Nijverheidstraat 8, 1135 GE Edam Vice President, Europe
The Netherlands Manufacturer’s authorized EU representative
3
English
For Permanent Installation
WARNING:
Permanent installations involve the attachment of the loudspeakers to brackets or other mounting surfaces
for long-term or seasonal use. Such mountings, frequently in overhead locations, involve risk of personal injury if either the
mounting system or the loudspeaker attachment fails.
Bose
®
offers permanent mounting brackets for the safe use of these loudspeakers in such
installations. However, we realize some installations may call for use of other, custom-designed
mounting solutions or non-Bose mounting products. While Bose Corporation cannot be held
responsible for the proper design and use of non-Bose mounting systems, we offer the following
guidelines for the permanent installation of any Bose MB4 loudspeaker:
• Obtain your mounting system from a reputable manufacturer, and make sure the system
is specifically designed for the loudspeaker of choice and your intended use.
• Before using a custom-designed and fabricated mounting system, have a licensed
professional engineer review the design and fabrication for structural integrity and safety
in the intended application.
• Notice that all threaded attachment points on the bottom and top of each loudspeaker
cabinet have a metric M8 thread with at least 10 usable threads.
•Use a safety cable, separately attached to the cabinet at a point not in common with
the load-bearing attachment points of the bracket to the loudspeaker.
• If you are unfamiliar with the proper design, use, and purpose of a safety cable, consult
a licensed professional engineer, a rigging professional, or a theatrical lighting trades
professional.
CAUTION:
Use only graded hardware. Fasteners should be metric Grade 8.8 minimum and should be tightened
using a torque not to exceed 50 inch-pounds (5.6 Newton-meters). Overtightening the fastener could result in irreparable
damage to the cabinet and an unsafe assembly.
Do not re-tighten these fasteners unless they are visibly loose. Lockwashers or a thread locking compound intended for
hand disassembly (such as Loctite
®
242) should be used for a vibration resistant assembly.
CAUTION:
The fastener should be long enough to engage no fewer than 8 and no more than 20 threads of the
attachment point. A fastener should protrude by 16 to 22 mm, with 18 mm preferred (
5
/
8
to
7
/
8
inch, with
11
/
16
inch preferred)
beyond the assembled mounting parts to provide sufficient threaded attachment to the loudspeaker. Using a fastener that is
too long may result in irreparable damage to the cabinet and, when overtightened, can create a potentially unsafe assembly.
Using a fastener that is too short provides inadequate holding power and may strip the mounting threads, resulting in an
unsafe assembly. Confirm that at least 8 full threads are engaged in your assembly.
CAUTION:
Do not attempt to alter the threaded attachment points. While SAE
5
/
16
-18 UNC fasteners are very
similar in appearance to the metric M8, they are not interchangeable. Do not attempt to re-thread the attachment points to
accommodate any other thread size or type. Doing this will render the installation unsafe and will permanently damage the
loudspeaker. You may substitute
5
/
16
-inch washers and lockwashers for the 8 mm ones.
Installation of MB4 Loudspeaker..........................continues on p11
Produktspezifikationen
| Marke: | Bose |
| Kategorie: | Lautsprecher |
| Modell: | Panaray MB4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Bose Panaray MB4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Bose
25 November 2024
12 Oktober 2024
22 September 2024
17 September 2024
5 September 2024
1 September 2024
31 August 2024
25 August 2024
24 August 2024
23 August 2024
Bedienungsanleitung Lautsprecher
- Jabra
- Delvcam
- On-Q
- Soundsation
- Philips
- Mpman
- Finlux
- The T.amp
- Telefunken
- TWF
- Hanwha
- Logic3
- Harman Kardon
- Soundlogic
- MusicMan
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025