Boss Reverb RV-200 Bedienungsanleitung
Boss
Nicht kategorisiert
Reverb RV-200
Lies die bedienungsanleitung für Boss Reverb RV-200 (18 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 77 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 39 Bewertungen. Hast du eine Frage zu Boss Reverb RV-200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/18
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual (p. 17)). After reading, keep the document(s) where it will be available for immediate reference.
© 2023 Roland Corporation 01
Owner’s Manual
2
Getting ready
Installing the batteries
Insert the batteries facing the correct way, as shown in the illustration.
* “Lo” will appear on the display if the batteries are low. Replace them with new ones.
NOTE
¹When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit carefully; do not drop it.
¹If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the items related to batteries
that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s manual (p. 17)).
Attaching the rubber feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
* Using this unit without attaching the rubber feet may damage the oor.
3
1
Display
Shows the reverb time and other values.
2
[TIME] knob
Press the knob to switch between the knob’s functions (reverb time mode and memory number mode).
When this unit is in MENU mode, the knob is used to select the parameter and conrm the value (p. 10).
°1
Reverb time mode
Example of reverb time
indication
(when value is 0.1 s)
* This is set to reverb time mode by factory default.
Turn the [TIME] knob to set the reverb time.
To change a value in larger steps, turn the [TIME] knob while
pressing it.
Type Parameter Display
ROOM
0.1–10.0 s
0.1s = ”0.1”
1s = “1.0”
10 s = “10.0”
HALL
PLATE
SPRING
SHIMMER
ARPVERB
SLOWVERB
MODULATE
LO-FI
GATE
+DELAY 0.01–1.00 s 10 msec =”0.01”
1 s = “1.00”
REVERSE 0.1–1.0 s 0.1 s = ”0.1”
1 s = ”1.0”
NAn N-1
Memory number mode
Example of memory number
indication
(when set to MANUAL or Memory 1)
Turn the [TIME] knob to switch between memory numbers.
NOTE
To edit the reverb time for a memory, press the [TIME] knob once to
switch to reverb time mode and then turn the knob.
When you turn the [TIME] knob while it is in memory number
mode, the memory number changes and the values you were
editing are discarded.
To save a memory you’ve edited, perform the write operation
(p. 9).
Panel descriptions
Top panel
1
2 3 4
5 6 7 8
9
10
11 12
13 14
Produktspezifikationen
| Marke: | Boss |
| Kategorie: | Nicht kategorisiert |
| Modell: | Reverb RV-200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Boss Reverb RV-200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Boss
4 September 2024
3 September 2024
3 September 2024
31 August 2024
31 August 2024
28 August 2024
26 August 2024
26 August 2024
26 August 2024
26 August 2024
Bedienungsanleitung Nicht kategorisiert
- A-NeuVideo
- Valeton
- JAXY
- Asaklitt
- Enders
- Interstuhl
- KRK
- ETNA
- Craftsman
- ASSA ABLOY
- Majestic
- Alutruss
- Avenview
- IMG Stage Line
- Ctek
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025