Boyo VTB301CA Bedienungsanleitung


Lies die bedienungsanleitung für Boyo VTB301CA (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu Boyo VTB301CA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
VTB301CA
QUICK
INSTALLATION
GUIDE
Quick Installation Guide
BOYO®
1.
System Overview
One VTB301 CA high resolution CVBS / AHD color camera
with the following features:
IP69K Waterproof Rating
Mirror/Non-Mirror image, switched by loop wire
Distance line on/off, switched by loop wire
CVBS/AHD
signal, switched by loop wire
720P/1080P
resolution, switched by loop wire
170° (D) Wide
view
angle
360-degree adjustable mounting angle
Auto-iris lens that automatically adjusts to light conditions
Infrared light for improved image quality
in
low-light
situations
Night vision distance
of
approx. 26 ft
65 ft Extension Cable Included
Supplied installation accessories
2.Content List
D
CZ.
Camera x 1
65
ft.
Extension Cable x 1 Power Cord x 1 Product Manual x 1 Screw
x2
3.
Installation
Install the VTB301 CA as follows:
a.
Install the VTB301 CA camera
in
the desired location, as
follows:
1) Fasten the camera mounting bracket, using the 2 self-
tapping Philips screws, to the desired mounting
surface, as shown
in
the Step 1 arrows
of
Figure
1.
2) Position the camera
in
the camera mounting bracket.
Adjust the camera to the proper angle, and then attach
the camera and sun visor to the camera mounting
bracket using the 2 supplied self-tapping Philips
screws, as shown
in
the Step 2 and Step 3 arrows
of
Figure
1.
Figure 1 . Installing the Camera
b.
Route the extension cable from the camera location to the
location
of
the output device (not supplied), such as a
monitor
or
switcher.
c.
Insert the male connector
of
the extension cable into the
appropriate female audio/video port
of
the output device
(not supplied), such as a monitor
or
switcher.
CAUTION:
To
reduce the risk of electrical shock, disconnect the
battery from the electrical system of the vehicle before
starting the installation.
4.
Reverse/ Normal Image {Selectable)
The camera default setting is
in
reverse viewing. To change to
non-mirror viewing, cut the ORANGE wire and re-power the
camera for the changes to take effect.
5.
Parking lines
On
/ Off {Selectable)
The camera default setting is grid line OFF. To turn on the grid
lines, cut the GREEN wire and re-power the camera for the
changes to take effect.
6.
AHD / CVBS {Selectable)
The camera default setting is
in
CVBS signal. To connect and
change to AHD siginal, cut the PURPLE wire and re-power the
camera for the changes to take effect.
7.
1080P / 720P {Selectable)
The camera default setting is 720P resolution when AHD siginal
is activated. To change to 1080P resolution, cut the BROWN
wire and re-power the camera for the changes to take effect.
Ground
[
g]
Video Power 12VDC
8.
Specifications
Item
Specification
Image
Sensor
AHD
-
1/2.9
inch
CVBS
-
1/4
inch
TV
System
NTSC
Effective
Pixels
AHD
-
1920
(H)
x
1080
(V)
CVBS
-
640
(H)
*480
(V)
Minimum
Illumination
0.0
Lux
Power
Supply
Range
8-35VDC
Operating
Temperature
-20°C
to
70°C
Dimensions
3
inches
x 3
inches
x
2.25
inches
(Width
X
Height
X
Depth)
Horizontal
Angle
1080P:
125
degrees
720P:
125
degrees
CVBS:
80
degrees
Diagonal
Angle
1080P:
170
degrees
720P:
170
degrees
CVBS:
100
degrees
Suppied
Accessories
Manual
Screws
20M
Extension
cable
DC
Power
cable
Warranty
card
Registration
card
CAUTION: Before inserting screws into the mounting surface,
ensure that the underside of the mounting surface
is
clear of equipment that might
be
damaged
by
the
screws.


Produktspezifikationen

Marke: Boyo
Kategorie: Nicht kategorisiert
Modell: VTB301CA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Boyo VTB301CA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten