Brother DR-2300 Bedienungsanleitung

Lies die bedienungsanleitung für Brother DR-2300 (2 Seiten) kostenlos online; sie gehört zur Kategorie druckertrommel. Dieses Handbuch wurde von 37 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 19 Bewertungen. Hast du eine Frage zu Brother DR-2300 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Toner that doesn’t cost the earth

Print on recycled paper, using refilled cartridges

© Zinetic.co.uk. All Rights Reserved

INSTRUCTIONS FOR RESETTING BROTHER DR2200 DRUM

Before you begin

Don’t touch the drum cylinder or expose it to sunlight. The drum is

very sensitive to light and also touch and is very easy to damage.

The Brother printer counts drum rotations and shuts the drum unit down when it reaches its page yield of

12,000 pages at 5% coverage.

If your drum was working correctly prior to the "DRUM STOP" message appearing, you can reset the drum

unit on your printer and continue printing. We do this by telling the printer we have installed a new drum unit.

1.With the printer switched ON - Remove drum unit and toner cartridge from the printer.

(they are joined together)

2.Replace drum unit and toner cartridge back into the printer.

3.We now need to reset and trick the printer into thinking you have a new drum installed.

4.Open the front cover of the printer

HL PRINTERS

DCP / MFC PRINTER

5.Now we need to tell the printer that a ne drum was installed and reset the drum counter

HL PRINTERS

Press and hold down button for about 4 seconds Go

until all the LEDs light up.

Once all 4 LEDs are lit, release the button Go

DCP / MFC PRINTERS

Press Clear. To confirm you are installing a new drum

unit, press 1

When the LCD shows Accepted, close the front cover

Your drum unit has been reset !

Produktspezifikationen