Buffalo DM902 Bedienungsanleitung
Buffalo
Kontaktgrillen
DM902
Lies die bedienungsanleitung für Buffalo DM902 (32 Seiten) kostenlos online; sie gehört zur Kategorie Kontaktgrillen. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Buffalo DM902 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
Bistro Contact
Grill
Instruction manual
Model • Modèle • Modell • Modello • Modelo • Malli:
CD474/DM902/DM903/GJ454/GJ455/GJ456
UK
Safety Tips
• Position on a flat, stable surface
• A service ent/qualified technician should carry out installation and any repairs if required. Do not remove and components orag
service panels on this product
• Consult Local and National standards to comply with the following:
• Health and safety at work legislation
• BS EN Codes of practice
• Fire Precautions
• IEE wiring regulations
• Building regulations
• DO NOT use jet/pressure washers to clean the appliance
• DO NOT use the appliance outside
• DO NOT allow oil or fat to come into contact with the plastic components. Clean immediately if contact occurs
• DO NOT store products on top of the appliance
• Always carry, store and handle the appliance in a vertical position and move by holding the base of the appliance
• Do not carry when hot
• Always switch off and disconnect the power supply to the unit before cleaning
• Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities
• If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid
a hazard
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
Product Description
CD474 - Buffalo Bistro Contact Grill, Single Ribbed plates
DM902 - Buffalo Bistro Contact Grill, Double Ribbed plates
DM903 - Buffalo Bistro Contact Grill, Large Ribbed plates
GJ454 - Buffalo Bistro Contact Grill, Single Flat plates
GJ455 - Buffalo Bistro Contact Grill, Large Flat plates
GJ456 - Buffalo Bistro Contact Grill, Double Flat plates
Pack Contents
Buffalo Bistro Contact Grill
Scr aper
Allen K ey
Should y ou
find
any damage a result transit, please contact yas of our Buffalo dealer immediately.
Installation
Remove your Buffalo Bistro Contact Grill from its packaging and be certain that all protective plastics and residues are thoroughly cleaned
from its surface.
Locate on a firm level surface.
Buffalo recommended that you allow no less than 100mm ventilated gap around the perimeter of this unit. Ensure that the stainless steel
waste tray is correctly positioned.
Connect to the electricity supply using the plug, the Grill is now ready to turn on and operate.
Preparing the cooking surface - make sure the cooking surface is clean, turn the unit on and apply a
generous amount of oil to the plates. Using the thermostat control, set the Grill to 110˚C, when the Grill has reached temperature, switch off
and carefully wipe any excess oil from the plates.
UK
Operation
The Contact Grill should be turned on at least 5 minutes before use
To get efficient use out of this unit while in intermittent use, it is recommended that the Grill plates remain closed and the thermostat turned
down, when not cooking. This will assist in reducing power consumption and also allow for quicker heat response when needed.
Buffalo recommends that the cooking surface is lightly greased, before each use.
A temperature setting of between 200°Cand 220°C will be sufficient for general cooking. This may vary for particular food types, individual
needs, or experience.
Simply place the food products on the bottom grilling surface and lower the top plate down, and cook to your needs.
IF TOP PLATE BECOMES LOOSE/ STIFF USE THE ALLEN KEY SUPPLIED TO ADJUST THE TENSION. TURN CLOCKWISE TO
TIGHTEN, ANTI-CLOCKWISE TO LOOSEN.
Cleaning, Care & Maintenance
Before starting to clean the Grill, disconnect from the electricity supply by removing the plug from the socket. Clean the cooking surface
regularly, we recommend it is cleaned after every use session.
When the cooking surfaces are still warm, wash with warm soapy water and then rinse thoroughly with
clean water. This will help to stop food sticking to the plates. Remove the fat drip tray and
wash in warm soapy water.
Other surfaces can be wiped over with a damp cloth to remove all food residues. Do not immerse the Contact Grill
in water or use water sprays to clean it.
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely difficult to remove. To prevent
this, follow the cleaning steps below:
• Always turn OFF the appliance and disconnect from the power supply before cleaning
• Allow the appliance to cool before cleaning, but for best results clean the plates when they are still slightly warm
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance
• Take care when using scrapers to remove cooking residues as they can damage the cooking surface
• Dry thoroughly after cleaning
• A BUFFALO dealer or qualified technician should carry out repairs if required
Scraping
After each use, scrape the appliance with a scraper/grill stone/copper brush or flexible spatula to remove excess fat and food. A waste
tray is provided for the scrapings if necessary
If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured and re-seasoned
NOTE: IT IS VITAL THAT THE COOKING SURFACE IS RE-SEASONED AFTER SCOURING
WARNING: DO NOT USE STEEL WOOL AS IT MAY LEAVE SHARDS THAT COULD CONTAMINATE FOOD
Waste tray
This appliance feature a waste tray to collect any liquid or fats that run off during cooking
At least once a day, remove and empty the waste tray before washing with warm, soapy water. Do not allow the tray to overfill, or
excess grease will run out of the overflow hole at the front of the tray
WARNING: DO NOT REMOVE TRAY DURING OT IMMEDIATELY AFTER USE AS THE CONTENTS WILL BE HOT
Produktspezifikationen
| Marke: | Buffalo |
| Kategorie: | Kontaktgrillen |
| Modell: | DM902 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Buffalo DM902 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kontaktgrillen Buffalo
11 Juli 2024
7 Juli 2024
Bedienungsanleitung Kontaktgrillen
- ECG
- Khind
- Kooper
- Domo
- Tristar
- Tower
- Ideeo
- Adler
- Black And Decker
- Concept
- Orbegozo
- Arendo
- Elba
- Nedis
- Inventum
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
13 Oktober 2024
7 Oktober 2024
4 September 2024
19 August 2024
19 August 2024
7 August 2024
7 August 2024
14 Juli 2024