Byron SX-209 Bedienungsanleitung

Lies die bedienungsanleitung für Byron SX-209 (2 Seiten) kostenlos online; sie gehört zur Kategorie Türklingel. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 6 Bewertungen. Hast du eine Frage zu Byron SX-209 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Door Chime Unit

Inserting the chimes batteries

Slide open the battery compartment door. Insert 2 x 1.5 volt alkaline

batteries (“C”, UM2 & R14 - included) into the battery compartment,

ensuring the battery polarity matches the internal markings. It will beep

twice to indicate that it is ready for the new operation code registration

(Please see Digital Code Set Up). Close the battery compartment.

Wire Free Door Chime Kit SX-209

Model No. SX-209

CR2032

“C”

LR14

“C”

LR14

100m

100m

Operating

Distance

Door Chime UnitPush Button Unit

Remove the locking screw from the

battery fastener. Insert 1 x 3 volt

CR2032 Lithium batteries (Byron

SX100) in the battery compartment,

ensuring the battery polarity

matches the internal markings, then

tighten the screw on the battery

fastener to hold the batteries

firmly in their compartment.

No wiring is required for this Wire Free Door Chime Kit. When the Push Button is pressed, it sends a wire free

signal to the door chime unit that activates the chime. As the operating range is up to 100 metres (320 ft.

approx. - in open field), you can mount or take the door chime virtually anywhere in the home. However, the

transmission range of the wire free signal will be reduced if the signal is transmitted through a number of walls

or ceilings. Metal, and UPVC doorframes will also reduce the operating range.

Push Button Unit

Remove the back of the case by

pushing in the tab on the bottom

with a small, flat screw driver.

Using the two holes on the back of

the Push Button as a template,

mark the fixing position for the unit.

Drill holes and fit wall plugs and

secure the Push Button unit with

screws (self-tapping N3 x 16mm

screw).

Wire FreeBatteries

Required

Batteries

Included

Operating

Distance

Loudness

OpenField

1 x 3 volt Lithium batteries (CR2032) have already been installed. Your Push Button is ready to use.

To change

the battery

80db

Push

Button

This

way

up

Operation

Indicator

To mount

Flashing LED Light

Push Button

Melody Selector

Additional Byron “SX” range products can be purchased for compatibility. (except SX-4 and SX-41)

5) Piano

6) Harmony

1) Electro Mechanical - Ding Dong

2) Westminster - 8 notes

3) Jive

4) Wedding March

7) Dog Barking

8) Ringer

The Melody Selector is located inside the push button unit. It is a small button on the top left corner of the

battery compartment marked with “S”. Press the switch once, the melody will change to the next one on the list,

there are a total of 8 melodies for selection. The Push Button is pre-set to “Electro Mechanical - Ding Dong”

therefore, if no change is required, it should not be adjusted.

Melody Selection

C

R

2

0

3

2

C

R

2

0

3

2

Battery

Compartment

Melody

Produktspezifikationen