BZBGear BG-UHD-KVM21A Bedienungsanleitung

Lies die bedienungsanleitung für BZBGear BG-UHD-KVM21A (2 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 18 Bewertungen. Hast du eine Frage zu BZBGear BG-UHD-KVM21A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1 2

3 4

FEATURES:

INTRODUCTION:

The 2x1 USB HDMI KVM Switch 4K2K shares one HDMI display between two

HDMI sources.

● Share an HDTV or display, USB keyboard & mouse, and microphone

between two USB/HDMI computers and devices

● Provides an additional USB 2.0 sharing ports with over-current detection and

protection

● Switch between devices via front push button or hotkey

● Supports 4K@30Hz and PC's UXGA 1920x1200

resolutions

● Supports Dolby True HD and DTS HD Master Audio formats

● HDMI1.4 & HDCP compliant

● Video bandwidth: up to 3Gb/s

● Metal housing for better RF shielding

2×1 USB HDMI KVM Switch 4K2K

BG-UHD-KVM21A

PACKAGE CONTENTS:

● 2×1 USB HDMI KVM Switch 4K2K

● Power adapter

● Quick installation guide

COMPATIBILITY:

● Windows, Mac, Linux computers

● Game consoles, Blu-Ray DVD players, and other CE devices

LAYOUT:

Console

Audio PC2 PC1Select

Source

ON/OFF

USB Mouse

Port

USB Keyboard

Port

USB PortMICAudio

out

Audio

LED

Audio SwitchPort

LED

Port

Select

Figure 1: Front Panel Layout

● Connect to USB mouse devicesUSB Mouse Port:

● Connect to USB keyboard devicesUSB Keyboard Port:

● Connect to other USB devicesUSB Ports:

● Connect to microphoneMIC:

● Connect to earphoneAudio out:

● Audio ON/OFF IndicationAudio LED:

● Switch to enable/disable the MIC/Audio out functionAudio Switch:

● Port LED: Indicate which HDMI source is selected

● Port Select: Switch between the HDMI sources

Power JackHDMI OutputUSB PortHDMI Input

5 V/DC, 2 AHDMI

Sink

HDMI USB

PC1

HDMI USB

PC2

Figure 2: Rear Panel Layout

● Power Jack: Connect to the included power adapter

● HDMI Output: Connect to HDMI Display

● HDMI Input: Connect to source device's HDMI

● USB Port: Connect to PC's USB port

HARDWARE INSTALLATION:

Hotkey:

1. Power off all devices you plan to connect to the 2x1 USB HDMI KVM Switch 4K2K.

2. Connect a monitor/display to HDMI OUTPUT of the switch by an HDMI cable.

3. Connect a USB keyboard and a USB mouse to USB keyboard and Mouse

Ports of the switch.

4. Connect the computer's HDMI connector to the switch's INPUT 1 connector

using the HDMI cable.

5. Connect the computer's USB port to the switch's PC1 connector (USB Type

B) using the included USB cable.

6. For the second computer, follow steps 4 to 5 to connect the preferred

system/device to INPUT 2 and PC2.

7. Optional: Connect other USB peripherals you wish to share between the

connected computers/devices to the extra USB ports on the switch.

8. Connect the power adapter into the switch's Power Jack.

9. Power up the first computer/device and wait until it is fully booted up. Make

sure the keyboard and mouse work properly.

10. Once the first computer system is successfully setup, press the Switch

button and power up the second computer/device to verify the setup properly.

11. The installation is complete and the 2x1 USB HDMI KVM Switch is ready for

use.

Note: At least 1 connected device has to be a PC with USB port. Otherwise, the

switching mechanism couldn't work.

Quick Installation Guide

Follow the hotkey command listed below for selected operating functions:

Command Function

[Caps Lock]+[Caps Lock]+1

[Caps Lock]+[Caps Lock]+2

[Caps Lock]+[Caps Lock]+ → or ↓

[Caps Lock]+[Caps Lock]+ ← or ↑

[Caps Lock]+[Caps Lock]+S

[Caps Lock]+[Caps Lock] +S+n

Switch to PC1

Switch to PC2

Switch to next PC

Switch to previous PC

Auto-scan mode every 10 seconds

Set auto-scan rate, [Esc] switch to regular mode

Produktspezifikationen