Canarm BI-16RM Bedienungsanleitung
Seiten 4 Ventilator
Lies die Bedienungsanleitung für Canarm BI-16RM kostenlos online oder lade das PDF herunter. 29 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
BI_BIRM_UserGuide Page 1 of 4
BI SERIES – UTILITY BLOWERS
Operation Instructions & Parts Manual
MODELS: BI-10 – BI-36; BI-10RM – BI-36RM
READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY
Rotating parts on fans should not be exposed. Where these components are not protected by ductwork, cabinets or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be
opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful
inspection should be carried out to ensure no foreign material is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi
BI/BI –RM series blowers. Failure to comply with instructions could result in personal injury and/or property damage.
UNIT DESCRIPTION
Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a
backwardly inclined (BI) blade configuration to generate air moving performance. The BIseries are single inlet blowers,
which have a standard CCW rotation and bottom horizontal discharge. The discharge direction may be easily altered to
any one of eight positions without removal of the wheel venturi or housing.
Complete access for motor and drive installations and servicing may be completed by partial removal of the drive
compartment cover assembly. Pre-lubricated ball bearings, motor adjustment hardware and a dynamically balanced
wheel are standard equipment. Operating temperature range is - 65 to 220 deg. F.
UNIT DESCRIPTION
Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate
the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi
to establish clearance, re-tighten bolts.
FIGURE 1
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Ventilator |
| Modell: | BI-16RM |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm BI-16RM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ventilator Canarm
Canarm ALX165-DD033EC Bedienungsanleitung Canarm ALX135-UD033EC Bedienungsanleitung Canarm ALX150-UD050EC Bedienungsanleitung Canarm BI-22RM Bedienungsanleitung Canarm SXB42CBD10300 Bedienungsanleitung Canarm BI-24RM Bedienungsanleitung Canarm CEPD300 Bedienungsanleitung Canarm CEPD150 Bedienungsanleitung
Alle Canarm Ventilator Bedienungsanleitungen
Beliebt in Ventilator
Canarm Calibre Bedienungsanleitung Canarm ALX120-UD033EC Bedienungsanleitung Canarm AX24-1V Bedienungsanleitung
Bedienungsanleitung Ventilator
Neueste Bedienungsanleitungen für Ventilator
Living & Co F42 Bedienungsanleitung Living & Co TF02E Bedienungsanleitung DeepCool FL12 Bedienungsanleitung Progress Lighting P250084 Bedienungsanleitung Progress Lighting P250110 Bedienungsanleitung Yato YT-82933 Bedienungsanleitung Uline H-6440 Bedienungsanleitung Domo DO8158 Bedienungsanleitung NABO VTUD 8145 Bedienungsanleitung Ambiano SF-2 Bedienungsanleitung