Canarm DPL-36 Bedienungsanleitung
Seiten 6 Nicht kategorisiert
Lies die Bedienungsanleitung für Canarm DPL-36 kostenlos online oder lade das PDF herunter. 17 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
Oct-07
Delhi Industries Inc. 523 James Street, Delhi, Ontario N4B 2Z3
Tel. (519) 582-2440 Fax. (519) 582-0581www.delhi-industries.com
DPL/DPL-AF SERIES – PLENUM FANS
OPERATION INSTRUCTIONS AND PARTS MANUAL
MODELS: DPL/DPL-AF-12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36
GENERAL SAFETY
Rotating parts on fans should not be exposed. Where these components are not protected by ductwork, cabinets or
covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be
opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful
inspection should be carried out to ensure no foreign material is present which could become airborne in the system.
Read installation and operation instructions carefully before attempting to install, operate or service Delhi DPL/DPL-AF
Series Blowers. Failure to comply with instructions could result in personal injury and/or property damage. Retain
instructions for future reference.
Fig. 1
MODELMAX. H.P SHAFT DIA. WEIGHT
DPL-12 7-1/2 1” 51
DPL-13 7-1/2 1” 57
DPL-15 7-1/2 1” 68
DPL-16 10 1-3/16” 80
DPL/DPL-AF-18 7-1/2 / 10 1-3/16” 91 / 81
DPL/DPL-AF-20 10 / 15 1-3/16” 104 / 96
DPL/DPL-AF-22 10 / 15 1-7/16” 148 / 139
DPL/DPL-AF-24 15 / 20 1-7/16” 185 / 162
DPL/DPL-AF-27 15 / 25 1-7/16” 205 / 185
DPL/DPL-AF-30 20 / 30 1-11/16” 236 / 248
DPL/DPL-AF-33 25 / 40 1-15/16” 288 / 306
DPL/DPL-AF-36 30 / 40 1-15/16” 344 / 357
ALL SHAFTS ARE KEYWAYED
GENERAL
Inspect unit for damage, report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate
the blower wheel by hand to ensure free rotation. . If rubbing occurs, loosen the set screw(s), re-position the wheel to
the shaft centre, re-tighten set screw(s).
UNIT DESCRIPTION
xRigid welded angle iron frame construction.
xFull Class II capability.
xMin L10 bearing life of 35,000 hrs (average L50 bearing life of 175,000 hrs).
xStandard backwardly inclined flat blade steel wheel for DPL-12 through DPL-36 (aluminum wheel available as
an option).
xStandard Aluminum airfoil wheel for DPL-AF-18 through DPL-AF-36.
Produktspezifikationen
| Marke: | Canarm |
| Kategorie: | Nicht kategorisiert |
| Modell: | DPL-36 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Canarm DPL-36 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Canarm
Canarm KE-12 Bedienungsanleitung Canarm DPL-13DD Bedienungsanleitung Canarm KE-08 Bedienungsanleitung Canarm PW-12S Bedienungsanleitung Canarm DPL-18 Bedienungsanleitung Canarm KE-14 Bedienungsanleitung Canarm HRE-16 Bedienungsanleitung Canarm HRE-13 Bedienungsanleitung