Carson SensorMag SM-44 Bedienungsanleitung
Carson
Nicht kategorisiert
SensorMag SM-44
Lies die bedienungsanleitung für Carson SensorMag SM-44 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Carson SensorMag SM-44 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
SENSORMAGTM SM-44
Instructions for use:
1) Remove your camera lens.
2) Refer to your camera manual to access the sensor cleaning mode.
3) Set the camera on a sturdy surface with the lens mount facing up. The sensor loupe was designed to ÿt multiple camera mounts.
Using the sliding lever located on the bottom of your SensorMag (Fig. 1), extend or retract the mount extension depending on your
camera mount's size to achieve a tight ÿt. Place the SensorMag over the camera mount (Fig. 2).
4) Turn on the LED lights and use the focus ring at the top of the sensor loupe (Fig. 3) to bring your sensor and any dust on it into focus.
5) After you have located dust and debris on your sensor, swing out the top portion of the SensorMag 45 degrees (Fig. 4) to allow access
to your sensor for cleaning.
6) Clean the sensor following the instructions that come with your sensor-cleaning product carefully.
7) Repeat steps 5 and 6 until you no longer see dust through your SensorMag.
8) Replace camera lens and set camera to function as normal.
9) To replace batteries, remove safety screw and slide down battery door (Fig. 5 (Fig. 5) Replace exhausted batteries with new CR2032
button cell batteries. Follow polarity indicators marked on battery compartment (Fig. 6). Slide battery door back in place and
reinstall safety screw.
Warning:
Please note that this magniÿer was designed to aid in camera sensor cleaning should you choose to do so. Only clean your sensor in
manners approved by the manufacturer. Do not touch sensor unless instructed to do so by the manufacturer of the sensor-cleaning
product. Always follow the instructions that come with the sensor-cleaning product. Carson Optical assumes no responsibility for
damage to your camera due to improper cleaning of your sensor.
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
Produktspezifikationen
| Marke: | Carson |
| Kategorie: | Nicht kategorisiert |
| Modell: | SensorMag SM-44 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Carson SensorMag SM-44 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Carson
18 September 2024
6 September 2024
4 September 2024
25 August 2024
25 August 2024
6 August 2024
5 August 2024
4 August 2024
3 August 2024
2 August 2024
Bedienungsanleitung Nicht kategorisiert
- L.R.Baggs
- UGo
- ENDORFY
- BabyOno
- Fysic
- Dynacord
- AquaPur
- HK Audio
- Enviroswim
- Dedra
- 2box
- ProForm
- Schumacher
- Martin Audio
- Salter
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025