Casio Edifice EFS-S560DC-1AVUEF Bedienungsanleitung

Lies die bedienungsanleitung für Casio Edifice EFS-S560DC-1AVUEF (2 Seiten) kostenlos online; sie gehört zur Kategorie Armbanduhr. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 24 Bewertungen. Hast du eine Frage zu Casio Edifice EFS-S560DC-1AVUEF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Operation Guide 5633

E-9

Charging Time

The times below are general guidelines for reference only.

Charging Time to Support Daily Use

Exposure Level (Brightness)Approximate Charging Time

Outdoor sunlight (50,000 lux)8 minutes

Sunlight through a window (10,000 lux)30 minutes

Daylight through a window on an overcast day

(5,000 lux)48 minutes

Indoor fluorescent lighting (500 lux)8 hours

E-8

Low Battery Alert

The second hand will jump at two-second intervals to alert you when the charge is

low.

2-second jump

E-7

Approximate Battery Operating Time

HAt least five monthsGood (high charge)

MTwo days to five monthsGood (medium charge)

LNo more than two daysLow

Low Charge and Dead Battery Conditions

An alert operation is performed when the battery charge goes low.

E-6

Caution!

xThe case of the watch may become quite hot when charging. Guard against burn

injury after charging.

xAvoid charging in the following locations, and anywhere else where the watch may

become very hot.

−On the dashboard of an automobile parked in the sun

−Close to an incandescent light source or other sources of heat

−Locations exposed to direct sunlight for long periods

Battery Indicator

The battery level/stopwatch minute hand normally indicates the approximate amount

of remaining operating time of the battery will provide.

xBattery operating time is not indicated while the stopwatch is in use.

xAfter resetting the stopwatch to all zeros, the stopwatch minute hand will go back

to indicating battery operating time if you press or if you do not perform any B

operation for 60 seconds.

E-5

Solar Charging

A solar panel generates electrical power that charges a built-in (secondary) battery.

The entire face is a solar panel, so power is generated when the face is exposed to

light. Keep the watch exposed to light as much as possible.

Charging the Battery

When you are not wearing the watch, leave it where it is

exposed to light. For stable operation, expose the watch to at

least a half day of light per month.

When wearing the watch, try to keep your clothing from

blocking its face (solar panel). Charging efficiency is reduced

significantly even if the face is blocked only partially.

E-4

Contents

Before Using the Watch for the First Time ..........................................E-2

Solar Charging ....................................................................................E-5

Indicators and Crown Operation .......................................................E-11

Setting the Current Time and Day ....................................................E-12

To adjust the time setting ...........................................................................E-12

To change the day indicator setting ............................................................E-13

Using the Stopwatch ........................................................................E-14

Abnormal Hand Movement or Function .............................................E-18

Specifications................................................................................... E-19

E-3

Crown Operations

Some water-resistant models (100meters, 200meters)

have a screw-in crown. When you need to perform a crown

operation, rotate it towards you to unscrew it. Then pull

the crown out. Avoid applying undue force when pulling.

The watch loses its water resistance while the crown is

unscrewed. After performing a crown operation, fully screw

the crown back in.

Crown

Loosen

If your watch has a rotary bezel...

You can rotate the bezel to align its mark with

the minute hand. Then you will be able to tell how

much time has elapsed since aligning the mark.

Start

Elapsed time

Current

E-2

Before Using the Watch for the First Time

Crown

Spacer

xDepending on your watch model, there may be a spacer

installed at the factory around the crown. If your watch has

a spacer, you should remove the spacer before using the

watch.

xAfter removing the spacer, use the procedures in “Crown

Operations” (page E-3) and “To adjust the time setting”

(page E-12) to set up the watch for use.

E-1

ENGLISH

xYour watch may differ somewhat from the one shown in the illustration.

MA1910-EA © 2019 CASIO COMPUTER CO., LTD.

Produktspezifikationen