CDN SD0502 Bedienungsanleitung

Lies die bedienungsanleitung für CDN SD0502 (4 Seiten) kostenlos online; sie gehört zur Kategorie Waage. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu CDN SD0502 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Model: SD0502

DIGITAL PORTION CONTROL SCALE, 5 LB

5 POUNDS/2.27 KILOGRAMS by pounds:ounces and kilograms.grams

FOR GENERAL WEIGHING

• NSF

®

Certied

•Small prole

•Selectable units

•Tare function

•Hold mode

•Overload indication

•Battery status indication

•On/off button

•Auto-off after 2 minutes; disabled when the AC

adapter is used

•Field calibration

•Removable stainless steel platform

•Platform Size:

5.35 W x 5.35 L (in)/13.6 W x 13.6 L (cm), removable

•Food-safe ABS plastic with BioCote

®

•Resolution: 0 lb:0.1 oz, 1 g

•Product Dimensions:

5.90 W x 1.75 H x 7.87 D (inches)/

15.0 W x 4.45 H x 20.0 D (cm)

•AC Adapter:

100-240VAC 50/60Hz input, 9V DC (500mA) output,

included

•Two AAA alkaline batteries included

Note: Clean the scale before each use.

Important: DO NOT IMMERSE IN LIQUID.

Note: In the following instructions, names of the control

buttons are shown in CAPS. Function information that

appears on the display is shown in BOLD CAPS.

BATTERY INSTALLATION

Replace battery when LCD becomes dim. bAtt

appears on the display for 2 seconds before turning

off when the batteries need to be replaced.

1. Power off the unit before installing the batteries.

2. Remove battery cover on the bottom by pressing

the latch toward the battery cover and lifting up.

3. Install two AAA 1.5V IEC LR03 alkaline batteries

observing polarity shown in compartment.

4. Replace the battery cover until it clicks shut.

POWER ADAPTER

Before using the external power adapter, make sure

that the printed voltage complies with the local

voltage.

Note: Use only an original CDN power adapter (AD-AC3302). The

use of another adapter is subject to approval by CDN.

1. Insert the adapter plug into the jack in the rear of

the scale.

2. To turn the scale on, press the ON/OFF button

as described in Section A: On/Off. The scale will

remain on until turned off.

Note: When the power adapter is plugged in, the auto-off

feature is disabled.

OPERATING INSTRUCTIONS

Place the scale gently on a hard and at surface and

make sure it is steady before use to obtain accurate

measurements.

A. On/Off

1. Press the ON/OFF button to turn on. The display

ashes ––– and then returns to zero.

2. Press and hold the ON/OFF button for

2 seconds to turn off.

B. Auto Off

The scale automatically turns off after 2 minutes

of inactivity when the AC adapter is not plugged in.

Note: Auto-off is disabled when the AC adapter is used.

Tel 800 338-5594 Fax 800 879-2364 Web CDNmeasurement.com

Produktspezifikationen