CDN SD1104 Bedienungsanleitung
CDN
Küchenwaage
SD1104
Lies die bedienungsanleitung für CDN SD1104 (2 Seiten) kostenlos online; sie gehört zur Kategorie Küchenwaage. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu CDN SD1104 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Model: SD1104
Digital Scale
11 pounds/5 kilograms/176 ounces/5 liters
by pounds:ounces, uid ounces, grams and milliliters
Features
• Tare function
• Backlit display
• Stainless steel platform
• Selectable units
• Overload indication
• Battery status indication
• On/off button
• Auto-off after 60 seconds
• Mounting: hang
• Batteries and instructions included
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that
appears on the display is shown in BOLD CAPS.
Battery Installation
Replace battery when LCD becomes dim. LO appears
on the display when battery status is low and needs to
be replaced.
1. Power off the unit before installing the battery.
2. Remove battery cover on the back by pressing
the latch in and lifting up.
3. Install three 1.5V AAA batteries observing
polarity shown in compartment.
4. Replace the battery cover until it clicks shut.
Operating Instructions
Place the scale gently on a hard and at surface and
make sure it is steady before use to obtain accurate
measurements.
A. On/Off
1. Press the ON/TARE button to turn on.
2. Press the ON/TARE button for 2 seconds to turn off.
B. Auto Off
The scale automatically turns off after 30 seconds
of inactivity.
C. Unit Selection
Press the UNIT button to select the desired unit.
The display cycles through , , and .g .oz lb:oz ml
D. Tare
The tare function resets the scale display to zero
in order to measure only the weight of an item. It is
frequently used to subtract the weight of containers.
1. When the scale is on, place a container on
the platform.
2. Gently press the ON/TARE button to reset the
display to zero. appears on the left of the TARE
display and 0:0.0 oz appears in the main area of
the display.
3. Place the item into the container or directly on
the scale platform. The weight of only the last
item added will appear on the display.
4. Continue to repeat steps 2 and 3 to measure
the respective weights of additional items. When
all the items are removed from the platform, the
total weight of all items appears on the display.
5. To clear the tare, remove all items from the
platform and gently press the ON/TARE button.
TARE disappears from the left of the display and
0:0.0 oz appears in the main area of the display.
E. Error Messages
1. EEEE indicates an overload when the item being
measured exceeds the capacity of the scale.
Immediately remove the overweight item to avoid
causing damage to your scale.
Note: Clean the scale platform before each use.
Produktspezifikationen
| Marke: | CDN |
| Kategorie: | Küchenwaage |
| Modell: | SD1104 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit CDN SD1104 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Küchenwaage CDN
18 August 2024
18 August 2024
18 August 2024
18 August 2024
Bedienungsanleitung Küchenwaage
- Taylor
- Metaltex
- Cloer
- Koenic
- Joseph Joseph
- OK
- Livoo
- First Austria
- Adler
- Tefal
- Orion
- Zephir
- Bestron
- Breville
- Black And Decker
Neueste Bedienungsanleitung für -Kategorien-
18 Januar 2026
13 Januar 2026
13 Januar 2026
30 Dezember 2026
29 Dezember 2026
21 Dezember 2025
20 Dezember 2025
8 Dezember 2025
7 Dezember 2025
7 Dezember 2025