Chamberlain 041-0182-000 Bedienungsanleitung

Lies die bedienungsanleitung für Chamberlain 041-0182-000 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 54 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 27.5 Bewertungen. Hast du eine Frage zu Chamberlain 041-0182-000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

End Panel Replacement

Repair Parts 041-0182-000 and 041-0183-000

Installation

You will need:

• 1/4" magnetic nut driver

• Long-nosed pliers

• 1/4" long-shafted magnetic nut driver and socket

• Phillips head screwdriver

• Flathead screwdriver

The images throughout this manual are for reference only and your

product may look different.

1. Disconnect the electrical and battery power (if applicable) to the

garage door opener. Remove the battery and place in a safe location.

2. Remove the control panel door from the opener. (A)

a. Squeeze hinges toward each other.

b. Remove the control door panel from the hinge setting, and place in

a safe location.

c. Remove the end panel cover from the end panel. (B)

3. Remove the end panel from the opener. (C)

4. Attach the provided blank label to the new end panel, and copy (D)

important product information from the original end panel.

To prevent possible SERIOUS INJURY or DEATH:

• Disconnect ALL electric and battery power BEFORE performing

ANY service or maintenance.

To prevent damage to the receiver/logic board, DO NOT touch printed

circuit board of replacement receiver/logic board during installation.

ALWAYS wear protective gloves and eye protection when changing

the battery or working around the battery compartment.

WARNING: This product can expose you to chemicals including

lead, which are known to the State of California to cause cancer

or birth defects or other reproductive harm. For more information

go to www.P65Warnings.ca.gov.

Logic Board

End PanelReceiver

Logic Board

End Panel Cover

Control Panel Door

PART

NUM

B

ER:

SE

RIAL NUMBE R

DAT

E:

SS

IC: 2666A -

FCC

ID:

100W Max

26W

Max

CONT

A

INS

:

FC

C ID: C

OF

WMNBM11

IC: 1

02

3

9A-W

M

NB

M1

1

®

BC

D

RED

WHITE

WHITE

GREY

Wire

Channel

Antenna

wires

Logic Board

End Panel

Wire

Harnesses

Receiver

Logic

Board

Antenna wires

routing

To insert or

remove the

wires from the

terminal, push

in the tab with a

screwdriver tip.

A

LiftMaster Brand Garage Door Opener

5. Install the new end panel.

6. Attach the end panel cover

7. Attach the control door panel.

8. Reconnect power to the opener.

9. Test of the safety reverse system. Refer to the owner’s manual.

Produktspezifikationen