Chauvet STRIKE 4 Bedienungsanleitung
Chauvet
Nicht kategorisiert
STRIKE 4
Lies die bedienungsanleitung für Chauvet STRIKE 4 (28 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Chauvet STRIKE 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
STRIKE 4 QRG EN
2
About This
Guide
The STRIKE 4 Quick Reference Guide (QRG) has basic product information such
as connection, mounting, menu options, and DMX values. Download the User
Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Safety Notes
• DO NOT open this product. It contains no user- serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
• DO NOT look at the light source when the product is on.
• CAUTION: Flashing light is known to trigger epileptic seizures. User must
comply with local laws regarding notification of strobe use.
• CAUTION: This product’s housing may be hot when lights are operating.
• Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
• CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation may
form on the internal electronics of the product. To avoid causing a failure,
allow product to fully acclimate to the surrounding environment before
connecting it to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it. (IP20)
• DO NOT operate this product if the housing, lenses, or cables appear
damaged.
• DO NOT connect this product to a dimmer or rheostat.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. From inside the U.S., UK,
Ireland, Mexico, or Benelux, use the information in Contact Us
at the end of this
QRG.
What Is
Included
• STRIKE 4
• Power Input Cord
• Warranty Card
• Quick Reference Guide
STRIKE 4 QRG EN
3
AC Power
This product has an auto ranging power supply that can work with an input voltage -
range of 100 240 VAC, 50/60 Hz.–
Power Linking
You can link up to 5 STRIKE 4 products at 120 V, 9 products at 208 V, or
10 products
at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
To eliminate unnecessary wear and improve its lifespan, during periods of
non-
use completely disconnect the product from power via breaker or by
unplugging it.
Replacing he T
Fuse
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The STRIKE 4 will work with a DMX controller using a 5-pin DMX serial
connection. A DMX Primer is available from www.chauvetprofessional.com.
DMX Connection
The STRIKE 4 5-uses a pin DMX data connection for its DMX personalities:
1 Ch 3 Ch 4 Ch 9 Ch, , and . See the User Manual for information about
connecting and configuring the product for DMX operation.
Master/Slave
Connection
The STRIKE 4 uses the DMX data connection for its Master/Slave mode. See the
User Manual for information about the product connect and configure
for
m s aster/ lave operation.
Produktspezifikationen
| Marke: | Chauvet |
| Kategorie: | Nicht kategorisiert |
| Modell: | STRIKE 4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chauvet STRIKE 4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Chauvet
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- GPX
- AbleNet
- Warwick
- Sony
- BluGuitar
- Lumag
- Bebob
- ECG
- Zuiver
- CAME-TV
- Juniper
- Traco Power
- PurAthletics
- Bintec-elmeg
- Billow
Neueste Bedienungsanleitung für -Kategorien-
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025
4 Juli 2025