Chauvet WELL Connect Bedienungsanleitung
Chauvet
Nicht kategorisiert
WELL Connect
Lies die bedienungsanleitung für Chauvet WELL Connect (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Chauvet WELL Connect oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
Quick Reference Guide
Model ID: WELLCONNECT
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
WELL CONNECT QRG Rev. 1
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the WELL CONNECT.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment do interference to es cause harmful
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• CAUTION:
• This product’s housing may be hot when operating. Mount this product in a location with adeq
uate
ven
tilation, at least 20 in (50 cm) from adjacent surfaces.
• When transferring the product from extreme temperature environments, (e.g., cold truck to warm humi
d
ba
llroom) condensation may form on the internal electronics of the product. To avoid causing a failure
,
allow the product to fully acclimate to the surrounding environment before connecting it to power.
• ALWAYS:
• Disconnect from power before cleaning the product or replacing the fuse.
• Replace the fuse with the same type and rating.
• Use a safety cable when mounting this product overhead.
• Connect this product to a grounded and protected circuit.
• DO NOT:
• Open this product. It contains no user-serviceable parts.
• Connect this product to a dimmer or rheostat.
• Operate this product if the housing or cables appear damaged.
• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affe
ct
it
(adhere to standards for the published IP rating).
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect th
e
pr
oduct from power via breaker or by unplugging it.
• In the event of a serious operating problem, stop using immediately.
Connection of the control signal: DMX line
• The product has XLR sockets for DMX input and output.
• Notice: This control circuit is isolated and belongs to the Class 2 data port.
• The control circuit has a cumulative leakage current of less than 3.5 mA.
EN
2
WELL CONNECT QRG Rev. 1
QUICK REFERENCE GUIDE
What is Included
Battery Charge Notes
Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD, SERIOUS
INJURY, and/or PROPERTY DAMAGE if damaged, defective, or improperly used.
Control Panel Description
• WELL CONNECT
• EPSU USB-C
• USB-C to USB-C cable
• Quick Reference Guide
• ALWAYS:
• Charge using a manufacturer-provided charger while the product is powered off.
• Charge the battery in temperatures between 32°–95°F (0°–35°C).
• Allow a depleted battery to charge for a few minutes before turning on the product. If the batter
y is
comp
letely discharged, the device cannot be turned on immediately when the charger is connected.
• Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials.
• Keep the lid of any charging case open while charging.
• Keep batteries away from children.
• Store batteries between 40–60% charge.
• Follow local regulations when disposing of batteries.
• Replace with an authentic Chauvet battery.
• DO NOT:
• Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during charging.
• Leave the product unattended while charging.
• Deplete the battery below 10%.
• Charge the battery in a closed container.
• Charge for more than 24 hours.
Label/color Type Function
<Power> Button Press to turn the product on or off
<Black>
Knob/
button
Navigates upwards/downwards through the menu or increases/decreases the numeric value
of a function
Enables the currently displayed menu or sets a selected value into a function
<Link> Button Press to link fixtures
<Back> Button Exits the current menu or function
Produktspezifikationen
| Marke: | Chauvet |
| Kategorie: | Nicht kategorisiert |
| Modell: | WELL Connect |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chauvet WELL Connect benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Chauvet
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
3 September 2024
Bedienungsanleitung Nicht kategorisiert
- Digigram
- HDFury
- Backyard Discovery
- Netis
- Oase
- Titanwolf
- Wilfa
- Shimano
- Esoteric
- Kask
- Inter-Tech
- Atlas
- Furrion
- SinuPulse
- Kingston
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025