Chicco Bravo Rubber Wheel Kit Bedienungsanleitung
Chicco
Nicht kategorisiert
Bravo Rubber Wheel Kit
Lies die bedienungsanleitung für Chicco Bravo Rubber Wheel Kit (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 53 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 27 Bewertungen. Hast du eine Frage zu Chicco Bravo Rubber Wheel Kit oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
WARNING: Avoid serious injury or death to your child. Never
use your Bravo Stroller without Wheels PROPERLY attached!
You must read and understand the Rubber Wheel Accessory Kit
instructions and the instructions in the User Guide. If you do not
understand these instructions, DO NOT attempt to attach the
Wheels,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
Bravo Rubber Wheel Accessory Kit
IMPORTANT: Please also refer to the instructions
that came with your product.
Remove the Front Wheels by pushing in on the
Release Button, just above the wheel (as shown). And,
at the same time, pull the Front Wheel off of the Stroller
Frame. Repeat for the other Front Wheel.
1 On one side of the stroller remove the Rear Wheel
Hubcap using a flat blade screwdriver, as shown.
Discard
the old Hubcap.
2
1
SS0014E_01
Remove the Pin from the Rear Axle using a flat blade
screwdriver, as shown.
Discard the old Pin.
3 4
Remove the Washer from ther Rear Axle.
Discard the
old Washer.
Kit Includes:
TO REMOVE FRONT AND REAR WHEELS:
Tools Needed: Flat Blade Screwdriver
(1/8” wide)
Line up the tabs on the Hubcap with the holes on the
Wheel. Snap the Hubcap onto the Wheel to cover the
Washer and Pin. Repeat Steps 6-9 for other side. Pull on
each Wheel to make sure the Wheel assembly is securely
attached to the frame.
Attach the Front Wheel to the Stroller Frame, line up and
insert the Front Wheel Pin into the corresponding opening
on the Stroller Front Leg, as shown. Repeat for the other
side.
Make sure both Front Wheels are secure by pulling down
on Wheel assemblies.
10
WARNING: Check that the wheels are fitted correctly. Pull on Wheels after installation is
complete. Make sure all wheels are properly attached. If you have a problem, retry these instructions
provided AND review your User Guide. If you still have problems, STOP, Do Not use the Bravo Stroller,
and call Chicco at 1-877-424-4226.
2
“CLICK!”
“¡CLIC!”
TO ATTACH NEW RUBBER WHEELS ACCESSORY KIT:
On the same side, slide a Washer onto the Rear Axle. Secure the Wheel to the Rear Axle using the Pin. Push
the straight side of the Pin through the hole on the
Rear Axle. The curve on the Pin must curve around the
outside of the Rear Axle, as shown. Make sure Washer is
between the Pin and Wheel.
8
9
Remove the Wheel from the Rear Axle.
Discard the old
Wheel.
Repeat Steps 2-5 for other Rear Wheel.
5 On one side of the Rear Axle, slide on a Rear Wheel.
You may need to turn the Wheel until the brake tab fits
into one of the grooves on the Wheel if the brake lever is
down.
6
7
Produktspezifikationen
| Marke: | Chicco |
| Kategorie: | Nicht kategorisiert |
| Modell: | Bravo Rubber Wheel Kit |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chicco Bravo Rubber Wheel Kit benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Chicco
11 Oktober 2024
3 Oktober 2024
30 September 2024
20 September 2024
3 September 2024
31 August 2024
31 August 2024
22 August 2024
22 August 2024
21 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nolte
- Sky-Watcher
- Teenage Engineering
- PCTV Systems
- Digiquest
- Humax
- Hirschmann
- Dorma
- RAB
- Beeletix
- Medicinalis
- Imarflex
- MTM
- Comelit
- Key Digital
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025