Chief HB74P Bedienungsanleitung
Chief
Beamerzubehör
HB74P
Lies die bedienungsanleitung für Chief HB74P (2 Seiten) kostenlos online; sie gehört zur Kategorie Beamerzubehör. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 20 Bewertungen. Hast du eine Frage zu Chief HB74P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
© 2008 Chief Manufacturing, 8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-000114
5/28/08
MODEL: HB-74P Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative by calling
1-800-582-6480.
PARTS
Figure 1:
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Place four nylon spacers on top of projector.
2. Lower custom HB bracket onto spacers on top of projector. Ensure that the side hooks open towards back of the projector. (See Figure 1)
3. Attach HB bracket to projector using four M6 x 16mm Phillips flat head screws through nylon spacers. (See Figure 1)
Continued...
(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Phillips Flat Head, M6 x 16mm (4) SPACER, Nylon .50 x .260 x .1875
x 4
x
x 4
x
1
2
Toward front
of projector
I N S T A L L A T I O N I N S T R U C T I O N S
Continued...
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2:
4. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
5. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
6. Tighten the four 5/16" flange nuts. (See Figure 2)
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
Produktspezifikationen
| Marke: | Chief |
| Kategorie: | Beamerzubehör |
| Modell: | HB74P |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Chief HB74P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beamerzubehör Chief
28 Mai 2024
28 Mai 2024
27 Mai 2024
26 Mai 2024
26 Mai 2024
25 Mai 2024
23 Mai 2024
23 Mai 2024
21 Mai 2024
20 Mai 2024
Bedienungsanleitung Beamerzubehör
- Herma
- Barco
- BenQ
- NeoMounts
- Optoma
- NewStar
- NEC
- Vogel's
- Insignia
- Kanto
- Sony
- Chipolino
- Peerless-AV
- AV:link
- Projecta
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
26 November 2024
26 November 2024
25 November 2024
7 Juni 2024
7 Juni 2024
28 April 2024