Chief SLM520 Bedienungsanleitung


Lies die bedienungsanleitung für Chief SLM520 (1 Seiten) kostenlos online; sie gehört zur Kategorie Projektorzubehör. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 5 Bewertungen. Hast du eine Frage zu Chief SLM520 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
8802-000100 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-520 H
ANGER
B
RACKET
for Sharp PG-M20X, PG-M25X,
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
(1) SLB-520 Bracket (3) M3 -16mm Flat Head Screw
(4) 10 - 24 Thumb Nuts (3) 1/2" x .218 x 1/4" Nylon Spacer
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down.
2. Place the three ¼” nylon spacers over the three threaded inserts in the bottom of the
projector.
3. Place the SLB-520 bracket onto the three ¼” nylon spacers on the bottom of the projector
lining up the three mounting holes in the bracket with the three nylon spacers.
4. Using the three M3 x 16mm flat head screws, start them into the three threaded inserts
and tighten all fasteners at this time, securing the bracket to the projector. CAUTION:
When attaching the mount be careful not to overtighten screws.
5. See RPA and/or Smart-Lift™ Instructions.


Produktspezifikationen

Marke: Chief
Kategorie: Projektorzubehör
Modell: SLM520

Brauchst du Hilfe?

Wenn Sie Hilfe mit Chief SLM520 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten