Chief SLM780 Bedienungsanleitung

Lies die bedienungsanleitung für Chief SLM780 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beamerzubehör. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 6 Bewertungen. Hast du eine Frage zu Chief SLM780 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

8802-000076 04/11/03

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

I

NSTALLATION

I

NSTRUCTIONS

SLB-780 H

ANGER

B

RACKET

for Toshiba TLP-780,

Prior to assembly, unpack carton and verify contents.

For security installation, use security hardware package inside the ALL-POINTS™

Security Kit. Follow the instructions below for attaching the bracket to the projector

using either standard hardware or security hardware.

If you are missing any of the following components, please contact Customer Service at

1-800-582-6480

(1) SLB-780 Bracket (4) 10 - 24 Thumb Nuts

(2) M4 - 12mm Screws (2) M4 Flatwashers

(2) M3 - 6mm Screws (2) M3 Flatwashers

(2) Rubber Bump-on

I

NSTALLATION

I

NSTRUCTIONS

1. Turn projector upside down.

2. Using the two-rubber bump-ons, push them through the two larger holes in the bracket

from the bottom side so they are between the projector and the bracket.

3. Place the SLB-780 bracket on to the bottom of the projector lining up the four mounting

holes in the SLB-780 bracket with the four threaded inserts in the bottom of the projector

and secure using the two M4 -12mm mounting screws and M4 Flatwashers on the bottom

holes and the two M3 -6mm mounting screws and M3 Flatwashers on the back holes.

Only tighten screws until the rubber bump-on’s start to slightly deform. CAUTION:

When attaching the mount be careful not to overtighten screws.

4. See RPA and/or Smart-Lift™ Instructions.

Produktspezifikationen