Citronic DSM2-6 mkII Bedienungsanleitung
Citronic
DJ Ausrüstung
DSM2-6 mkII
Lies die bedienungsanleitung für Citronic DSM2-6 mkII (7 Seiten) kostenlos online; sie gehört zur Kategorie DJ Ausrüstung. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Citronic DSM2-6 mkII oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
DSM2-6mkII
DIGITAL SPEAKER MANAGEMENT
170.659UK
Features
96kHz sampling frequency, 32-bit A/D and D/A converter, 24-bit DSP processor
Input channel: 6-band parametric EQ, Delay, Polarity
Output channel: Signal select, 6-band parametric EQ, Gain, Delay, Polarity, Crossover, Limiter
Built-in USB and RS485 com ports
Program funcon, recall and copy
30 internal user programs
Password protecon
Introducon
Thank you for purchasing this high quality Citronic digital speaker management system. The aim of our audio
processing range is to oer cost-eecve, high performance sound sculpng tools for live sound
reinforcement and installaon applicaons. The Citronic DSM2-6 oers a comprehensive and professional
speaker management soluon delivering unsurpassed sound quality.
The DSM2-6 comprises a 2 input, 6 output digital sound processor with fully assignable high and low pass
crossover lters on each output for low or high frequency outputs or in combinaon for mid frequency
output. Each lter can be assigned as Buerworth, Linkwitz-Riley or Bessel type across various cut-o slopes
to give ulmate exibility.
Each input channel has gain and phase correcon and 6 bands of independent parametric or shelving EQ to
tailor the input tone.
Each output channel has 6 bands of independent parametric EQ for tone shaping and to compensate for
room or speaker anomalies. Also, each output has me alignment delay and adjustable limiter to protect the
outputs from overloading.
In addion to the user-friendly front panel menus, all funcons may be manipulated and stored via USB using
the included PC soware. A graphic interface allows quick and easy adjustment of all the main parameters.
Further slave DSM2-6 units can be linked via RS485 connecon (RJ45)
Signal connecon is XLR throughout, balanced or unbalanced and each output may be addressed from either
input A or B or A+B combined.
The internal memory can store up to 30 user programs and each can be named for easy idencaon. Each
can be recalled at will and the unit can be password protected to lock out the funcons to unauthorized
persons.
This unit has been built to Citronic’s exacng standards using high grade circuit boards and components
housed in a heavy duty steel chassis casing to give long term, reliable service.
Installaon
Set the DSM2-6 into a 1U space in a rack, ensuring enough depth to contain the unit and any connectors
aached to it. Secure the front panel with rack screws and nuts to hold in place and stop the unit slipping.
Plug the included power cable into the rear panel IEC connector and connect to the mains. Be sure to switch
the DSM2-6 on before switching on the power ampliers to avoid loud thumping sounds through the
speakers and switch the ampliers o before switching o the DSM2- 6.
Connecon to each channel is served by XLR for both inputs and outputs.
For balanced connecons, follow the table below.
Connecon
XLR connector
Hot (+)
Pin 2
Cold (-)
Pin 3
Earth
Pin 1
For unbalanced connecons, follow the table below.
Connecon
XLR connector
Signal (Hot)
Pin 2
Earth (Cold)
Pin 1 + 3
Applicaons
Use the DSM2-6 to control and distribute the signal to up to 6 amplier channels driving dierent speaker
arrays. A typical conguraon with 2 subs, 2 mid/tops and 4 surround cabinets is shown below…
Produktspezifikationen
| Marke: | Citronic |
| Kategorie: | DJ Ausrüstung |
| Modell: | DSM2-6 mkII |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Citronic DSM2-6 mkII benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung DJ Ausrüstung Citronic
21 August 2024
21 August 2024
21 August 2024
19 August 2024
18 August 2024
17 August 2024
17 August 2024
17 August 2024
17 August 2024
17 August 2024
Bedienungsanleitung DJ Ausrüstung
- Akai
- Gravity
- Apogee
- Wacom
- Fluid
- Muse
- Victrola
- Fenton
- MWM
- Kärcher
- Nektar
- Technics
- AV:link
- Arturia
- Majestic
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
14 Juni 2025
14 Juni 2025
11 Juni 2025
1 Juni 2025
15 Oktober 2024
8 Oktober 2024
2 Oktober 2024
29 September 2024
28 September 2024