Clarion CCUXM1 Bedienungsanleitung
Clarion
Hi-Fi-Anlage
CCUXM1
Lies die bedienungsanleitung für Clarion CCUXM1 (18 Seiten) kostenlos online; sie gehört zur Kategorie Hi-Fi-Anlage. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Clarion CCUXM1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/18
XM Passport Interface Adapter Interface Cable
Cable adaptador para la interface de XM Passport
Câble adaptateur pour l’interface XM Passport
CCUXM1
Installation Guide
Guía de instalación
Guide d’installation
2
English
Step 1:
Remove the head unit from your dashboard.
Important: Depending on how your head unit was installed you may have to remove part or
all of your dash board before the head unit can be pulled out. You may also have to remove
screws to complete this step.
Note: Before proceeding, make sure that the PIA has been programmed. Refer to the
PIA Installation Manual. Professional installation is recommended.
Step 2:
Connect the 34-pin cable connector to the Programmable Interface Adapter (PIA) mating
connector as shown in Fig. 1. Slide the rubber strain relief onto the PIA case. Attach the Car
Dock USB connector into the USB receptacle on the PIA. Make sure the connectors are
secure, and slide the top cover onto the bottom housing. (Refer to Fig. 2.)
Insatallation
Antenna
Note: Make sure all cables
are securely connected
Mating
Connector
Connector
Mini-Tuner and
Car Dock
Ground Wire
Yellow Wire, atter
Yellow and
black wire are
optional, based
on model.
Fuse
Fig. 1 PIA Cable Interface
3
English
Step 3:
Connect the end of the cable with the DIN connector and audio cables to the back of
the head unit as shown in Fig. 2. The shorter end of the cable, coming from the PIA, is a
pass-through cable that can be used to connect other products to your head unit, i.e., CD
changer.
Note: The location of the connections on the head unit may vary depending on the model.
Step 4:
Start your car and turn on your head unit to confirm that the XM Direct system is properly
connected. Please refer to your stereo owners manual on how to access XM mode. When
you tune to XM channel 1, you should see “XM Preview” on your head unit LCD, and hear
that channel through your car speakers. If not, check to make sure all connections are
correct or refer to the troubleshooting section of this installation guide.
Step 5:
Mount and secure the interface cable in a suitable location that will not interfere with the
radio and will not vibrate or rattle after installation.
Insatallation
Left / Right
Audio CablesDIN Connector
XM Radio
Tuner
Fig. 2 Head Unit (Rear View) Connections
Produktspezifikationen
| Marke: | Clarion |
| Kategorie: | Hi-Fi-Anlage |
| Modell: | CCUXM1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Clarion CCUXM1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hi-Fi-Anlage Clarion
16 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
14 August 2024
14 August 2024
13 August 2024
13 August 2024
13 August 2024
Bedienungsanleitung Hi-Fi-Anlage
- SoundCast
- Bigben
- Humantechnik
- Crystal Video
- Universal Remote Control
- Morel
- Salora
- Vivax
- Medion
- CE Labs
- MB Quart
- Logik
- Logitech
- Mackie
- Pyle
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
14 Juni 2025
12 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025