Clarion WG2510 Bedienungsanleitung

Lies die bedienungsanleitung für Clarion WG2510 (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 11 Bewertungen. Hast du eine Frage zu Clarion WG2510 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

10” (25.4cm) SUBWOOFER

Lightweight Reinforced Cone

High Strength Stamped

Steel BasketHigh Temperature Nomex Spider

Heavy Duty Copper Voice Coil

High Power 65 oz Strontium Ferrite Magnet

High Excursion NBR Surround

Kapton Voice

Coil Former

Fiber Dust Cap

Aluminumized Composite Dust Cap

Gold Plated Terminal

Air Cooling Voice Coil Chamber

Formed Top Plate

Internal Area cu. ft. (liter)0.5 (14.16)Internal Area cu. ft. (liter)1.0 (28.32)

-3dB Point (Hz)46-3dB Point (Hz)27

QtcEnclosure Damping0.76Tuning Frequency (Hz)33

HHeight -inch (cm)13 (33.02)HHeight -inch (cm)13 ( 33.02)

WWidth -inch (cm)18.5 (46.99)WWidth -inch (cm)24 (60.96)

DDepth -inch (cm)6.75 (17.15)DDepth -inch (cm)9.25 (23.50)

PPort Diameter and Length -inch (cm)3 x 15.25 (7.62x 38.74)

Ported Enclosure RecommendationSealed Enclosure Recommendation

NOTE: Internal volume is measured before speaker and/or port displacement. External dimensions are based on the use of 3/4”

(1.9cm) material. The port can be placed on any fitting face as long as the port ends are not obstructed. When using enclosures

other than recommended, contact technical support or your local installation expert. Proper enclosure design is one of the key

components to subwoofer performance and should be handled by experienced installers. Please contact your authorized Clarion

dealer for the best results.

VbVb

F3F3

Fb

Maximum Musical Input Power900WF

o

Resonance Frequency29Hz

Continuous Input Power300WV

as

Equivilant Stiffness24.5L

Sensitivity83dB Q

ts

Total Electromechanical Dampening 0.53

Impedance4 ohmsS

d

Cone Area314.6 cm²

Thiele / Small Electromechanical ParametersElectrical Specifications

9-25/32''DIA

1/4'' 5-23/32''

10-5/16''DIA

8-29/32''DIA

Produktspezifikationen