Cleveland TMKEL80T Bedienungsanleitung

Lies die bedienungsanleitung für Cleveland TMKEL80T (2 Seiten) kostenlos online; sie gehört zur Kategorie Küchenmaschine. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Cleveland TMKEL80T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Project

Item

Quantity

FCSI Section 11400

Approved

Date

760 Beta Drive, Unit D

Mayeld Village, Ohio 44143

Tel 1.216.481.4900

Fax 1.216.481.3782

Email [email protected]

www.clevelandrange.com

Timeless Quality, Trusted For Life ®

Mixer Kettles

Standard Features

•SolidState Temperature Control (±1°F) forperfect simmering

•SolidState Low WaterSafety Control

•Steamjacket filled with treated water, venting and/orrefilling is

not required

•50 psi Safety Valve and Steam Jacket Rating

•No Water Gauge required

•Rear mounted Pressure/Vacuum Gauge and Pressure Relief Valve

•Infinitely variable Scraper Speed Control from 0-40 rpm

•Infinitely Variable Ratio between Scraper And Agitator: Agitator

rotates from 0-8 times the speed of the Scraper

•Removable (without tools) Nylon Blades scape entire Jacketed

surface

•3 Horsepower Hydraulic poweredAgitator, Scraperand Bridge Lift

•Safety device prevents high speed starts

•Mixing stops when bridge is lifted - includes safety cover and

screen

•AgitatorandScraperare bayonet mounted for easy removal

•Tilt mechanism of Roller Bearings and case hardened Self-Locking

worm and segment gear

•Hot and Cold Water Faucets

•2" diameter Tangent Draw-Off Valve with Drain Strainer

•All Plumbing , Electrical and Hydraulics enclosedinStainless Steel

Consoles

•Enclosed, 10 Gauge Stainless Steel hydraulically operated Mixer

Bridge

•Kettle and all exterior surfaces are Stainless Steel

•Level adjustable feet (flanged for bolting)

•Large Pouring Lip

•Gallon Markings stamped into Scraper Shaft

•Standard 208-240 volts, 60 Hz, 3 phase, 4 wire, high wattage

•Typical approvals include UL., CSA, CE, NSF and ASME

•316 Stainless Steel Interior

•Two piece cover with safety screen

Options & Accessories

•Easydial style controls with Time, Temperature and Probe

Temperature Control with Data Logger (EZDYCICL)

•Food Strainer (FS-20)

•Flow Diverter (FD)

•Pan Carrier (PCK)

•Swing Funnels (SF-1 orSF-2)

•Power Tilt (PT)

•Kettle Accessory Kit (KAK) includes:

• Clean-up Brush (CB)• 36˝ Kettle Paddle (KP)

• 36˝ Kettle Whip (KW)• 36˝ Kettle Brush (KB)

• Draw-off Brush (DB)• 24 oz. Ladle (KL)

•Water Meter (GMF or LMF) Wall Mount or onStand (SWM)

•Leg Extensions

•Voltages (VOS) other than standard

•Temperature Chart Recorder (TCR)

Short Form Specifications

Shall be CLEVELAND, Model MKEL- _____ -T,

console/Leg mounted, Electric Mixer Kettle with

permanently filledSteam Jacket; 50 psi Kettle

Jacket Rating and Safety Valve, High Wattage

standard, Solid State Temperature (±1°F) and

Low WaterSafety Controls. 3 H.P. Hydraulic

poweredScraper/Agitatorand Bridge Lift. 0-40

rpmScraperSpeed with Variable Scraper to

Agitator Ratio from1-1 to 8-1.

Type 316 Stainless

Steel interior

, Stainless Steel enclosed Mixer

Bridge. All Plumbing, Electrical and Hydraulics

enclosed in Consoles. Gallon Markings. Safety

Device prevents high speed starts. Safety Device

prevents high speed starts; Mixer stops when

Bridge is lifted. Bayonet Mounted Agitator and

Scraper. 2" Tangent Draw-0ff Valve. Hot andCold

Water Faucet. Kettle and all exterior surfaces are

Stainless Steel.316 Stainless Steel Interior.

MIXER KETTLE, ELECTRIC

LEG MOUNTED, CONSOLE TYPE

2/3 JACKETED, TILTING

Shown with optional Power Tilt

& Product Temperature Control

KE004046-80

Section 8, Page 5

5663A 11 / 2023

Models

•MKEL-40-T•MKEL-80-T

•MKEL-60-T•MKEL-100-T

Produktspezifikationen