ClimeMET CM2011 Bedienungsanleitung

Lies die bedienungsanleitung für ClimeMET CM2011 (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermometer. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu ClimeMET CM2011 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CM2011

WIRELESS THERMOMETER

Instruction Manual

Please note: For optimum performance we would suggest placing the remote sensor in a

sheltered environment. Direct rainfall can aect the accuracy of your outdoor readings and

cause lasting damage to the device.

Contents:

1. 1 x Indoor station

2. 1 x Remote sensor

3. Instruction Manual

Functions:

lIndoor temperature

lOutdoor temperature

lMinimum/Maximum temperature

lIndoor Humidity

Quick Setup:

Please note: Use good quality Alkaline batteries and avoid using any form of

rechargeable batteries.

1. Place the batteries into the indoor receiver rst, followed by the batteries

for the remote sensor.

2. Within one minute the outdoor temperature data will be displayed

indicating that the receiver has synchronized with the transmitter. You

can then place the remote sensor outdoors and set the correct time.

3. If there is no outdoor temperature reading displayed on the indoor

station, make sure the units are within range of each other and repeat

the battery installation procedure. If a key is pressed before the weather

station receives the temperature signal, it will take 10 minutes before the

receiver re-synchronizes with the outdoor sensor. If a reset is

required for the receiver or transmitter, remove the batteries and

wait 10 seconds before re-inserting the batteries to ensure a

correct reset.

Key Operation:

There are two dierent function modes available: C/F mode and Min/Max ˚˚

mode.

Setting Mode:

Press the C/F key once and the temperature will switch from C to F. Press ˚˚˚˚

the same key again to change it back.

Min/Max Mode:

Press the min/max key once and the minimum indoor and outdoor

temperatures will be displayed.

Press the min/max key again and the maximum indoor and outdoor

temperatures will be displayed.

Press the min/max key a third time and the current temperature will be

displayed.

Press and hold the Min/Max key for 2 seconds and the recorded minimum or

maximum temperature will be reset to the current indoor/outdoor temperature.

If no key is pressed for 30 seconds the unit will switch itself back to normal

display mode automatically.

Specification:

lIndoor temperature range: -20C to +60C °°

lIndoor humidity range 20%-98%

lOutdoor temperature range: -40C to +65C °°

lTemperature accuracy: +/-1.0C °

lHumidity accuracy: +/-5%

lPower requirement (indoor station): 2xAAA LR3 alkaline batteries

lPower requirement (remote sensor): 2XAAA LR3 alkaline batteries

lBattery life: 12 months for receiver (approx)

l 24 months for transmitter (approx)

lTransmission frequency: 433.9MHz

lTransmission range: up to 50 meters (150 feet) in an open area

Caution:

lDo not reverse the polarity of the batteries

lDo not put the receiver close to metal

lAvoid exposing the remote sensor directly to rain

How to fix the outdoor sensor:

Note:To achieve a true temperature reading you should avoid mounting the

sensor in direct sunlight. We recommend that you mount the remote sensor

on an outside North-facing wall; obstacles such as walls, concrete, and large

metal objects will reduce the transmission range.

To wall mount the sensor, insert one correctly sized screw to the desired wall

and hang the outdoor sensor on the screw.

The outdoor sensors electronic components are coated with anti-humidity ’

resin, to protect the circuit function properly. However, the sensor is not

Produktspezifikationen