Coast PolySteel 200 Bedienungsanleitung

Lies die bedienungsanleitung für Coast PolySteel 200 (1 Seiten) kostenlos online; sie gehört zur Kategorie Taschenlampe. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 7 Bewertungen. Hast du eine Frage zu Coast PolySteel 200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

POLYSTEEL 200 INSTRUCTIONS:

BATTERY INSTALLATION:

Turn the tail cap in a counterclockwise direction to remove the cap.

Remove the battery cartridge.

Place three AAA batteries into the cartridge in the direction indicated in

the center of the cartridge.

Replace the cartridge in the light in the direction indicated by the arrow

on the cartridge.

Replace the tail cap and turn it clockwise to tighten it until it is com-

pletely closed.

Note: The POLYSTEEL 200 in clam pack packaging comes with batteries

pre-installed.

QUICK CYCLE SWITCH OPERATION:

This flashlight is equipped with COAST’s Quick-Cycle Switch, featuring

high, medium and low beams.

To activate the high mode from the off position, press the on/off switch

until it clicks once, then releases. Press the on/off switch until it clicks a

second time to turn off the light.

To activate the medium mode, press the on/off switch until it clicks a

third time, then release. Press the on/off switch until it clicks a fourth

time to turn off the light.

To activate the low mode, press the on/off switch until it clicks a fifth

time, then release. Press the on/off switch until it clicks a sixth time

to turn off the light.

The light can also be operated in “momentary” mode. Momentary mode

is activated by partially depressing the on/off switch (less pressure

than required for a full click). The momentary switch will cycle the light

through the high and low beam modes.

Any time the light is turned off for more than five seconds, the high/

medium/low cycle will reset, and the high beam will be activated when

the light is turned back on.

PURE BEAM FOCUSING OPTIC:

This flashlight is equipped with COAST’s Pure Beam Focusing Optic that

allows the user to choose between a broad flood beam and a focused

Bulls-Eye Spot beam for long distance illumination.

To adjust the beam into the Bulls-Eye Spot mode, turn the front bezel

of the light clockwise.

To change the beam into the flood light mode, turn the front bezel of the

light counterclockwise.

MAINTENANCE:

The POLYSTEEL 200 is rated IPX8 and submersible to 3 meters for 6

hours. Wipe the external body with a cloth moistened with water or

isopropyl.

POLYSTEEL 200

16-596v01N 1606A

For warranty and distributor information in

your country, visit: www.COASTportland.com

Produktspezifikationen