Cocraft PRO Edition MC300-T Bedienungsanleitung
Lies die bedienungsanleitung für Cocraft PRO Edition MC300-T (52 Seiten) kostenlos online; sie gehört zur Kategorie Multitool. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu Cocraft PRO Edition MC300-T oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/52
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
P R O E D I T I O N
Ver. 20170131
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-9926 PMF300S.1
PRO MC300-T
MULTI-TOOL 300 W
40-9926
MULTIVERKTYG MULTIVERKTØY
MONITOIMITYÖKALU MULTIWERKZEUG
ENGLISH
3
Multi-Tool
Art.no 40-9926 Model PMF300S.1
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services (see address details on theback).
Safety
General safety instructions for powertools
Warning! Readall theinstructions. Failure to adhere to thefollowing instructions may
lead to electric shocks, fires and/or serious injury. Theterm “power tools” in thewarning
text below refers to your handheld mains operated or battery operatedtool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Cluttered and poorly lit areas Keep thework area clean and well illuminated.
invite accidents.
b) Do not use power tools in explosive environments,e.g. near to flammable liquids,
gases ordust. Powertools generate sparks that can easily ignite dust orfumes.
c) Keep children and other bystanders away from thearea where you are using
thepowertool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) Thepower tool’s plug must fit correctly into thewall socket. Nevermodify
theplug in anyway. Neveruse anadaptor together with earthed powertools.
Unmodified plugs and suitable wall sockets minimize therisk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators. Thereis anincreased risk of receiving anelectrical shock if your
body is earthed.
c) Ifwater gets Do not expose thepower tool to rain or other wet conditions.
inside it increases therisk of electricshock.
d) Do not abuse themainslead. Neveruse thelead to carry thetool or pull
theplug from awall socket. Keepthelead away from heat, oil, sharp edges
and movingparts. Damaged or tangled leads increase therisk of electricshock.
e) When using power tools outdoors, use anextension lead that is suitable for
this purpose. Theuse of anextension lead designed for outdoor use decreases
therisk of electric shocks.
f) If theuse of thepower tool in awet environment is unavoidable, awall
socket equipped with aresidual current device (RCD) should beused.
Using anRCD significantly reduces thechances of you receiving anelectricshock.
Produktspezifikationen
| Marke: | Cocraft |
| Kategorie: | Multitool |
| Modell: | PRO Edition MC300-T |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cocraft PRO Edition MC300-T benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multitool Cocraft
7 August 2024
Bedienungsanleitung Multitool
- Craftsman
- VARO
- Extech
- Kress
- Trotec
- Stiga
- Ryobi
- AEG
- FERM
- MTM
- Topcraft
- Metabo
- CMT Orange Tools
- DeWalt
- Black And Decker
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
14 Oktober 2024
9 Oktober 2024
8 Oktober 2024
4 Oktober 2024
29 September 2024
21 September 2024
12 September 2024
11 September 2024
9 September 2024