Cocraft XAGD50 Bedienungsanleitung
Cocraft
Nicht kategorisiert
XAGD50
Lies die bedienungsanleitung für Cocraft XAGD50 (40 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 14 Bewertungen. Hast du eine Frage zu Cocraft XAGD50 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/40

ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HB18
ADJUSTABLE IMPACT DEPTH
40-7980
NAIL GUN
SPIKPISTOL T-DYCKERT SPIKERPISTOL
NAULAIN T-DYCKERT STAUCHKOPFNAGLER
Ver. 20180614
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-7980 XAGD50
10 50mm−


ENGLISH
3
T-Brad Nail Gun
Art.No 40-7980 Model XAGD50
Please read theentire instruction manual before using theproduct and save it
for future reference. We reserve theright for any errors in text or images and any necessary
changes made to technical data. If you have any questions regarding technical problems please
contact Customer Services.
Safety
Warning:
• Never hold your hand or any other part of yourbody close to the muzzle of the nail gun when
thegun is connected with thecompressed air hose.
• Never point thetool at any person or animal.
• Do not play with thetool.
• Never depress thetrigger if thenose of thetool is not pointed at theworkpiece.
• Always handle thetool with care.
• Never depress thetrigger or release thesafety catch while you are loading thetool.
• Use thetool solely for thepurpose for which it is intended.
• Never use thetool in such away that it is pointed at yourself or someone else in thework area.
• Do not use thetool as ahammer.
• Carry thetool by thehandle, not by theair hose.
• Never carry thetool with thetrigger depressed.
• Never modify thetool in departure from theoriginal design.
• Always keep in mind that misuse or faulty handling of this tool could injure yourself and others.
• Never fasten or tape thesafety catch and/or trigger in activated position.
• Never leave atool unattended when it is connected to theair line.
• Do not use this tool if it does not bear alegible warning decal.
• Do not continue using atool that is leaking air or is not working properly. Contact our
Customer Service for servicing.
• When using thetool, hold it in such away that no injury to thehead or body could result
should afall in pressure or hard spots on theworkpiece cause therecoil force to increase.
• Do not nail too close to theedge of aworkpiece. Thenail could pass through theworkpiece
and cause damage.
• Disconnect thetool from thecompressed air for transporting.
• Check frequently that both thetrigger and thesafety catch are working properly.
• Do not take apart any part of thetool.
• Make no provisional repairs.
• Always have authorized personnel do servicing and repairs, and only with original spare parts.
• Avoid weakening thehousing by engraving or scratching it, etc.
• Always make anote of where theelectric cable goes into walls, floors or ceilings before you
begin to use thenail gun.
• Thecompressed air fitting for thenail gun must be of thequick-coupling type. Theconnecting
piece on thetool may not have arear valve so that some air remains under pressure when
thenail gun has been disconnected.
Produktspezifikationen
Marke: | Cocraft |
Kategorie: | Nicht kategorisiert |
Modell: | XAGD50 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cocraft XAGD50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Cocraft
9 September 2024
9 September 2024
9 September 2024
9 September 2024
19 August 2024
16 August 2024
15 August 2024
14 August 2024
13 August 2024
12 August 2024
Bedienungsanleitung Nicht kategorisiert
- Aicon
- Blade
- Silicon Power
- Daikin
- Hamlet
- Kipor
- Tiptel
- TikkTokk
- REL Acoustics
- Gerber
- Clearblue
- WesAudio
- Capital Sports
- Tescoma
- V-TAC
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025