Code CRD900FD Bedienungsanleitung
Code
Barcode-Leser
CRD900FD
Lies die bedienungsanleitung für Code CRD900FD (2 Seiten) kostenlos online; sie gehört zur Kategorie Barcode-Leser. Dieses Handbuch wurde von 38 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 19.5 Bewertungen. Hast du eine Frage zu Code CRD900FD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
Using the CR900FD in a Universal Stand
The CR900FD has a stand detecon feature. By
default, when the CR900FD is placed in the stand,
the reader will automacally enter into moon
detecon mode. When in this mode, simply place
a bar code in the scan eld to acvate the reader.
The CR900FD will beep and ash a green LED to
indicate a ‘good read’ has occurred.
When the CR900FD is removed from the stand,
the reader switches to manual mode and the
trigger must be pressed to read a bar code.
Press and hold the CR900FD trigger, the two
blue bars eming from the reader are used for
targeng. Center the blue bars in the middle of
a bar code.
The opmal reading distance from reader to bar
code is approximately 4.0” (10 cm).
For USB Cable: plug the USB end of the Anity® cable into a USB port on the host device.
Aer several seconds, the reader will beep twice and the LED will turn o to indicate the
CR900FD is ready for use.
For RS232 Cable: plug the power supply into the AC outlet, plug the power supply cord into
the barrel jack of the cable, and connect the RS232 connector to the appropriate serial port
on the host device. Aer several seconds, the reader will beep twice and the LED will turn o
to indicate the CR1400 is ready for use.
Using the CR900FD Out of a Universal Stand
Powering on the CR900FD CR900FD Default Sengs
UPC/EAN/JAN
Code 39
Code 93
The CR900FD, out of the box, will read the following 1D bar codes:
The CR900FD can be upgraded to read 2D bar codes with the purchase of a license key. 2D
license keys can be purchased individually or as a package. Available licenses:
Conguraon Codes
Once the reader is at the opmal distance, the CR900FD will read the bar code (when the
trigger is pressed). The CR900FD will beep and ash a green LED to indicate a ‘good read’ has
occurred.
2 3
Code 128
Interleaved 2 of 5
Codabar
GS1 DataBar (RSS)
PDF417
Data Matrix
QR Code
Aztec Code
All 2D bar codes
Visit www.codecorp.com for upgrading/license key informaon.
Upgrade Opons
Note: a CR900FD will read Data Matrix conguraon codes.
The CR900FD can be quickly, and easily congured to meet the needs of dierent use cases.
A common conguraon is reading bar codes found on cell phone screens. To enable, or
disable, cell phone reading mode, scan the appropriate code below.
For more conguraon opons refer to the CR900FD Conguraon Guide located at
www.codecorp.com. For custom conguraon opons, please contact us at
suppo[email protected].
Enable Cell Phone Reading Mode Disable Cell Phone Reading Mode
Produktspezifikationen
| Marke: | Code |
| Kategorie: | Barcode-Leser |
| Modell: | CRD900FD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Code CRD900FD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Code
25 September 2023
25 September 2023
Bedienungsanleitung Barcode-Leser
- IC Intracom
- Aqprox
- Qoltec
- DeLOCK
- Olympia
- DENSO
- Mach Power
- Newland
- Atlantis Land
- Cypress
- Approx
- Wasp
- Nilox
- Datamax-O'neil
- Steren
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
19 Januar 2026
23 Dezember 2025
21 Dezember 2025
20 Dezember 2025
18 Dezember 2025
17 Dezember 2025
16 Dezember 2025
3 Dezember 2025
2 Dezember 2025