Cotech 52008X36 + 50074 Bedienungsanleitung

Cotech Nicht kategorisiert 52008X36 + 50074

Lies die bedienungsanleitung für Cotech 52008X36 + 50074 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 17 Bewertungen. Hast du eine Frage zu Cotech 52008X36 + 50074 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
GREAT BRITAIN CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZe-mail internet postal
Ver. 20170612
Cotech Smart Home
OutdoorRemote Switch
Art.no 36-6758 Model 52008X36 + 50074
Please read theentire instruction manual before using thepro-
duct and then save it for future reference. We reserve theright
for any errors in text or images and any necessary changes
made to technicaldata. In theevent of technical problems or
other queries, please contact our Customer Services.
Operating instructions
Installation
4. Remove theplastic tab
to activate thebattery in
theremote control.
5. Press thespecific button
on the [ ON ] side of
theremote to select
thecorresponding channel
(A, B, C or D) you want
to pair with thereceiver.
TheLED indicator button
will shine briefly to indicate
that pairing is complete.
6. Plug alight into theremote
switch and make sure that
it is switchedon.
Remote control
Clean theremote control by wiping it with adrycloth.
Remove thebattery from theremote control and store
it in adry, dust-free environment and out of thereach of
children whenever it is not to be used for anextended
period.
Responsible disposal
1. Plug theremote switch
into awall socket.
2. Hold in thebutton on
thefront of thereceiver
for at least 3 seconds
and then releaseit.
3. TheLED in thebutton
will start flashing slowly.
Thereceiver is now
ready to be paired
with aremote control/
transmitter. Note:
Thebutton will begin to
flash after it has been
released. Ifthebutton is
flashing when it is being
pressed, thepairing will
not be successful.
7. Turn thelight on or off using the [ ON ]/[ OFF ] buttons on
theremote control.
Care and maintenance
Receiver
Always unplug thereceiver before cleaning it with
adampcloth. Useonly mild cleaning agents, never
solvents or corrosive chemicals. Makesure that
thereceiver is completely dry before plugging it backin.
If it is not to be used for anextended period, thereceiver
should be unplugged from thewall socket and stored in
adry, dust-free environment, out of children’sreach.
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Receiver
Mains voltage 230 V AC, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Load (resistive) 0–3680 W
Load (inductive) 0–613 W
Remote control
Battery 1×CR2032
Frequency 433.92 MHz


Produktspezifikationen

Marke: Cotech
Kategorie: Nicht kategorisiert
Modell: 52008X36 + 50074

Brauchst du Hilfe?

Wenn Sie Hilfe mit Cotech 52008X36 + 50074 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten